User manual PANASONIC GP-US932CU

[. . . ] Operating Instructions 3CCD Color Camera CCU Model Nos. GP-US932CU GP-US932CUE GP-US932CUS GP-US932CUSE ON DC POW ER 12 3 E SCEN OFF LOW HIG H GAIN FREE ZE MEN U BAR AWC EXP AND D RA NGE SEL GP-U S93 2 CAM ERA Camera head: option Camera cable: option Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in these Operating Instructions. We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC. Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC. [. . . ] Follow the procedure below to specify the camera title. Top screen of SETUP menu <Character entry> · To revise the character, move the cursor to "" or "" and press the [SEL] button. Move the cursor to the character to be revised in the entry range and enter a character newly. · To enter a blank, move the cursor to "SPACE" and press the [SEL] button. · To delete all the entered characters, move the cursor to "RESET" and press the [SEL] button. c Move ** SET UP ** CAMERA ID ELC SHUTTER GAIN SENS UP OUTPUT SEL END P1 *OFF *OFF OFF OFF OFF RGB(NOR) the cursor to "POSI" and press the [SEL] button after title entry. The display positioning screen appears to show the entered camera title blinking. v Position the title with use of the [g], [h], [e], and [f] buttons and hold down the [MENU] button for more than 2 seconds. The title position is decided and the title creation screen appears again. Title creation screen ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789 (). , '":;&#!?= +-*/%$ÄÜÖÆÑÀ SPACE *POSI RET END RESET . . . . . . . . . . . . . . . . Editing area Display positioning screen FLOOR 1 z Set "CAMERA ID" to "ON" and press the [SEL] button. The title creation screen appears. Note: · Even if "CAMERA ID" is set to "OFF", pressing the [SEL] button calls up the title creation screen. Important: · When "CAMERA ID" is set to "OFF", the camera title does not appear even if the title is specified. x Move the cursor to the target item with use of the [g], [h], [e], and [f] buttons and press the [SEL] button. The entered characters are displayed in the entry range. 17 2. ELC setting [ELC] Setting ELC (electronic light control) to ON provides automatic adjustment of the screen brightness. The convergence level of ELC can be specified at "BRIGHTNESS" in the SEL menu ( page 25). If a photographic subject has a bright light such as a spotlight in its backgroud, the subject may appear shadowy. To eliminate this phenomenon, mask the bright area in the background to perform correction. Top screen of SETUP menu MANU: The detection area can be manually specified. ( page 18) AUTO: The dark areas are automatically covered and only the bright areas are automatically detected. c Move the cursor to "PEAK/AVE" and use the [e] and [f] buttons to adjust the detection level. When the cursor is moved to "P", the peak value (maximum) is detected. When the cursor is moved to "A", the average value is detected. Manual setup of detection area ** SET UP ** CAMERA ID ELC SHUTTER GAIN SENS UP OUTPUT SEL END P1 The detection area is manually specified. "ELC CONT" screen ** ELC CONT ** AREA PEAK/AVE ALL P. . . . |. . . . A *OFF *OFF OFF OFF OFF RGB(NOR) "ELC CONT" screen ** ELC CONT ** AREA PEAK/AVE ALL P. . . . |. . . . A RET END Mask setting screen RET END z Set "ELC" to "ON" and press the [SEL] button. The "ELC CONT" screen appears. x Move the cursor to "AREA" and use the [e] and [f] buttons to select an area. The area is selectable from the types shown below. The detection areas shown as follows are not displayed. ALL (default): All of the areas on the screen are the detection area. [. . . ] Check whether the connection is appropriately established. 9 The hue [MATRIX] unadjustable in the menu · Is the camera cable appropriately connected at both the connector of the CCU and the connector of the camera head?Connection between the camera head and camera cable is required to adjust the image quality. Check whether the connection is appropriately established. 9 26 Symptom Cause/solution · Is the lens aperture appropriately adjusted?Check whether the aperture is appropriately adjusted. [. . . ]