User manual PANASONIC HC-V110GA

[. . . ] Operating Instructions High Definition Video Camera Model No. HC-V210 HC-V210M HC-V110 Please read these instructions carefully before using this product, and save this manual for future use. VQT4T76 until 2013/1/17 Read this first ∫ About the recording format for recording motion pictures You can select from AVCHD*1, iFrame or MP4 recording formats to record motion pictures using this unit. (l 49) *1 / It is compatible with the AVCHD Progressive (1080/50p). AVCHD: It is suitable for viewing on a high-definition TV or for saving to disc*2. *2 / To save an image recorded in 1080/50p, it is required to copy to a disc using the supplied software HD Writer LE 2. 0. [. . . ] Proceed to Step 7. Stop the playback. Select [YES] and press the ENTER button. ≥ A confirmation message appears. ≥ To continue dividing and deleting other scenes, repeat Steps 2-7. To complete dividing ≥ Press the MENU button. ≥ It may not be possible to divide scenes with a short recording time. ≥ The actual division may slightly slip off the previously designated dividing point. - 67 - Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them. ) ≥ Change the mode to . 1 Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT]* * [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected transfer setting device in advance on the computer. 2 Select the scene/still picture to be protected using the cursor button, then press the ENTER button. ≥ The scene/still picture is selected and the indication appears on the thumbnail. Press the ENTER button again to cancel the operation. ≥ Press the MENU button to complete the settings. - 68 - Advanced (Playback) Relay scene combining [HC-V210M] You can combine the relayed scene (l 49) in the built-in memory and the continued scene in the SD card to be one into the SD card. Relay-recorded scene Relay scene combining A B C Built-in memory SD card Range of Relay Recording , select the play mode selection icon, and select the AVCHD ≥ Set the mode switch to scene. (l 28) 1 2 3 4 Insert the SD card that was used for Relay Recording. Select the menu. : [EDIT SCENE] # [RELAY SCENE COMBINE] When the confirmation message appears, select [YES] using the cursor button, then press the ENTER button. ≥ Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not deleted. ) Press the MENU button when the relay scene combining complete message is displayed. ≥ The thumbnail view of the SD card is indicated. ≥ Relay Recording information will be deleted when the relay scenes are combined, and Relay Recording will be possible again. ≥ When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed scenes will not be possible. - 69 - To cancel relay information : [EDIT SCENE] # [RELAY INFO CANCEL] ≥ When the relay information is cancelled, combining of the relayed scenes will not be possible anymore. Combining of the relay scene cannot be performed if the available space on the SD card is less than the volume of the relayed scene in the built-in memory. It is recommended to combine the relay scene using the HD Writer LE 2. 0. - 70 - Advanced (Playback) Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality may vary with the connected terminals. A 1 2 High quality HDMI terminal Video terminal ≥ HDMI is the interface for digital devices. If you connect this unit to an HDMI compatible highdefinition TV and then play back the recorded high-definition images, you can enjoy them in high resolution with high quality sound. 1 Connect this unit to a TV. HDMI mini cable (supplied or optional)*1 ≥ Be sure to connect to the HDMI terminal. ≥ Connecting with a HDMI mini cable (l 73) ≥ Playback using VIERA Link (l 74) B AV cable (supplied or commercially-available)*2 A Picture quality 1 High-definition images when connecting to HDMI terminal 2 Standard images when connecting to video terminal A/V *1 Use the HDMI mini cable that comes with this unit if supplied. If it does not come with a HDMI mini-cable, use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional). Check the accessories in the basic operating instructions. [. . . ] ≥ “AVCHD”, “AVCHD Progressive”, the “AVCHD” logo and the “AVCHD Progressive” logo are trademarks of Panasonic Corporation and Sony Corporation. ≥ Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ≥ HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. [. . . ]