User manual PANASONIC HCV727EF

[. . . ] iFrame: This is a recording format suitable for playing back or editing on Mac (iMovie’11). ≥ It is not compatible with motion pictures recorded in AVCHD format. MP4: This is a recording format suitable for playing back or editing on a PC. ≥ It is not compatible with motion pictures recorded in AVCHD format. ∫ Handling of built-in memory [HC-V210M] This unit is equipped with the built-in memory. [. . . ] (l 64) To delete all the divided points : [EDIT SCENE] # [DIVIDE] # [CANCEL ALL] ≥ The scenes that were deleted after division cannot be recovered. ≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes. ≥ It may not be possible to divide scenes with a short recording time. ≥ Data that has been recorded or edited on another device cannot be divided and the divided points cannot be deleted. - 66 - Dividing a scene to partially delete (iFrame, MP4) Divide the iFrame or MP4 scene, and delete unnecessary parts. This divides the recorded scenes in two and deletes the front half or back half. The scenes that were deleted after division cannot be recovered. ≥ Set the mode switch to , select the play mode selection icon, and set to [iFrame] or [MP4]. (l 28) 1 2 3 Select the menu. : [EDIT SCENE] # [SPLIT&DELETE] Select the scene you wish to divide using the cursor button and press the ENTER button. Select to set the dividing point. 0h00m15s ≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback. (l 57) ≥ Set to at least 2 seconds for the portions to be deleted and at least 3 seconds for the portion that is to remain. 4 5 6 7 Select the part for deletion, then press the ENTER button. Select [YES] and press the ENTER button to confirm (play back) the part for deletion. ≥ A confirmation message appears when [NO] is selected. *2 Use the AV cable that comes with this unit if supplied. Check the accessories in the basic operating instructions. ≥ Check that the plugs are inserted as far as they can go. - 71 - 2 Select the video input on the TV. ≥ Example: Select the [HDMI] channel with a HDMI mini cable. Select the [Video 2] channel with an AV cable. (The name of the channel may differ depending on the connected TV. ) ≥ Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV. ) 3 Change the mode to to play back. ≥ When connecting the device to a television, the television image will not be displayed in the following cases. j Recording video j When setting PRE-REC ∫ To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen Change the menu setting to display the images correctly. (Check the TV setting. ) : [SETUP] # [TV ASPECT] # [4:3] ≥ If you set the option to [4:3] and connect this unit and the TV with the AV cable, images or menu screens may be displayed in a reduced size. Example of images with a [16:9] aspect ratio on a regular TV (4:3) [TV ASPECT] setting [16:9] [4:3] ∫ To display the on-screen information on the TV When the menu setting is changed, the information displayed on the screen (operation icon and time code etc. ) can be displayed/not displayed on the TV. DISPLAY] # desired setting [SIMPLE]*: [DETAIL]: [OFF]: Information partially displayed All information displayed Not displayed * This setting is only available in recording mode. ≥ If a wide-screen TV is connected, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details. ) - 72 - Refer to the following support site for information about the Panasonic TVs that you can directly insert an SD card into the SD card slot on the TV and then play it back. [. . . ] This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www. mpegla. com. ∫ Licenses ≥ SDXC Logo is a trademark of SD-3C, LLC. [. . . ]