User manual PANASONIC HC-V750EB

[. . . ] Matsushita or any of its distributors will not be liable for any damage suffered by Licensee arising from or in connection with Licensee's use of the Software. Article 1 License Licensee is granted the right to use the Software, including the information recorded or described on the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively "Software"), but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not transferred to Licensee. Article 7 Export Control Licensee agrees not to export or re-export to any country the Software in any form without the appropriate export licenses under regulations of the country where Licensee resides, if necessary. Article 2 Use by a Third Party Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to use, copy or modify the Software, except as expressly provided for in this Agreement. Article 8 Termination of License The right granted to Licensee hereunder will be automatically terminated if Licensee contravenes any of the terms and conditions of this Agreement. Upon termination hereof, Licensee must destroy the Software and related documentation together with all the copies thereof at Licensee's own expense. Article 3 Restrictions on Copying the Software Licensee may make a single copy of the Software in whole or in part solely for back-up purpose. Article 4 Computer Licensee may use the Software only on one computer, and may not use it on more than one computer. Article 5 Reverse Engineering, Decompiling or Disassembly Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent either of them is permitted under law or regulation of the country where Licensee resides. Matsushita, or its distributors will not be responsible for any defects in the Software or damage to Licensee caused by Licensee's reverse engineering, decompiling, or disassembly of the Software. 2 VQT0X49 Contents End User License Agreement . . . . . . . . . . . . 2 Wide mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The operation icon is automatically displayed on the LCD monitor. 4 Press the cursor button up, down, left or right to operate. : Slide show (playback of the still pictures on the SD card in numerical order) start/ pause. ¢ : Plays back the previous picture. : Stops the playback, and shows the thumbnails. ¢ Only when [SLIDE SHOW] has been selected. (P65) 64 VQT0X49 Playing back still pictures as a slide show PLAY SETUP PLAY MODE LOCK DPOF SET PICTURE SLIDE SHOW Press the menu button, then use the cursor button to select [ PLAY SETUP]#[ PLAY MODE]# [SLIDE SHOW]. (P29) Still pictures will not be played as a slide show when [PICTURE] is selected. SETUP ENTER EXIT MENU About still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). The file format supported by this unit is JPEG. (Not all JPEG formatted files will be played back. ) If an out-of-specs still picture is played back, the folder/file name may not be displayed. This unit may degrade or not play back still picture recorded or created on another product and another product may degrade or not play back data recorded on this unit. Do not operate the mode dial during the slide show. When the access lamp is lit, do not insert or remove an SD card. It takes time to display the still picture depending on the number of pixels of the still picture. ­ When [PLAY MODE] is set to [VIEW ALL]: All the scenes on the SD card ­ When [PLAY MODE] is set to [BY DATE]: All the scenes selected by date Do not turn off this unit while deleting. When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. If scenes conforming to DCF standard are deleted, all the data related to the scenes will be deleted. 67 VQT0X49 Locking scenes This is for preventing scenes from being deleted by mistake. Scenes recorded on an SD card can be locked so that they may not be deleted by mistake. (However even if you lock some scenes on an SD card, formatting the card will delete all the scenes. ) ¬ Rotate the mode dial to select or . 1 PLAY SETUP PLAY MODE LOCK DPOF SET YES NO Press the menu button, then use the cursor button to select LOCK]# [ PLAY SETUP]# [ [YES]. (P29) SETUP ENTER EXIT MENU 2 LOCK 1/24 Press the cursor button up, down, left or right to select the scene to be protected, then press the button in the centre. [ ] indication appears and the selected scene is locked. Press the button in the centre again to release the lock setting. 2 or more scenes can be set in succession. SETUP ENTER EXIT MENU To complete the settings Press the [MENU] button. Scenes displayed as thumbnails in shades of blue and white cannot be locked. (P106) If the write protection switch on an SD card is set to [LOCK], the scenes on the card cannot be locked. (P17) 68 VQT0X49 Formatting an SD card This is for initializing (formatting) cards. Please be aware that if an SD card is formatted, then all the data recorded on the card will be erased. We recommend using MotionSD STUDIO to acquire data recorded on this unit. (P77) ¬ Rotate the mode dial to select , , or . 1 SETUP DISPLAY DATE/TIME DATE FORMAT FORMAT CARD POWER SAVE SETUP ENTER 1/2 YES NO EXIT MENU Press the menu button, then use the cursor button to select [ SETUP]# [ FORMAT CARD]#[YES]. [. . . ] Remove the battery from the unit, and try charging it again. The battery temperature or ambient temperature may be extremely high or low. Wait until the appropriate temperature is restored before charging the battery again. If the battery still fails to charge, something may be wrong with the unit, battery, AC adaptor etc. [. . . ]