User manual PANASONIC HC-X910

[. . . ] HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 1 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 Basic Operating Instructions High Definition Video Camera Model No. HC-X920 HC-X929 HC-X920M HC-X910 Please read these instructions carefully before using this product, and save this manual for future use. This document explains basic operations of the unit. For more detailed explanation, please refer to “Operating Instructions (PDF format)” which is recorded in the enclosed CD-ROM. Model number suffix “EB” denotes UK model. VQT4R21 until 2013/1/15 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 2 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 Information for Your Safety Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic High Definition Video Camera. Please read these Operating Instructions carefully and keep them handy for future reference. [. . . ] (The battery temperature should also be the same. ) 1 2 Connect the AC cable to the AC adaptor, then the AC outlet. Connect the AC adaptor to the DC input terminal. ≥ The status indicator will flash red at an interval of 2 seconds (approximately 1 second on, 1 second off), indicating that charging has begun. It will turn off when the charging is completed. ∫ Connecting to the AC outlet If you turn on the unit while connecting with the AC adaptor, you can use the unit with power supplied from the outlet. When recording for a long time, keep the AC adaptor connected and use it together with the battery. A DC input terminal ≥ ≥ ≥ ≥ ≥ Do not use any other AC adaptors except the supplied one. We recommend using Panasonic batteries (l 9). If you use other batteries, we cannot guarantee the quality of this product. Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed. VQT4R21 11 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 12 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 Charging and recording time ∫ Charging/Recording time ≥ Temperature: 25 oC/humidity: 60%RH ≥ When using the viewfinder (times in parentheses are when using the LCD monitor) Battery model number [Voltage/Capacity (minimum)] Charging time Recording mode [1080/50p], [AVCHD 3D]* Supplied battery/ VW-VBN130 (optional) [7. 2 V/1250 mAh] 2 h 30 min [PH], [HA], [HG], [HE] [iFrame], [SbS 3D]* Maximum continuous recordable time 1 h 25 min (1 h 15 min) 1 h 30 min (1 h 20 min) 1 h 35 min (1 h 20 min) Actual recordable time 55 min (45 min) 55 min (50 min) 55 min (50 min) * This will be the recording mode when the 3D Conversion Lens (optional) is attached. ≥ The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/ low temperature. ≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. ∫ Battery capacity indication The battery capacity indication is displayed on the LCD monitor. ≥ If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. Recharge the battery or replace it with a fully charged battery. 12 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 13 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 Preparation Recording to a card The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an SD card, read the following. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating for motion picture recording. Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the following website. http://panasonic. jp/support/global/cs/e_cam (This website is in English only. ) ≥ Keep the Memory Card out of reach of children to prevent swallowing. Inserting/removing an SD card When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 21) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Caution: Check that the access lamp has gone off. Access lamp [ACCESS] A ≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up. 1 Open the SD card cover and insert (remove) the SD card into (from) the card slot. ≥ Face the label side B in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the centre of the SD card and then pull it straight out. 2 Press the C part of the SD card cover and close the SD card cover. ≥ Securely close it until it clicks.  VQT4R21 13 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 14 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 Preparation Turning the unit on/off You can turn the unit on and off using the power button, the LCD monitor or the viewfinder. Turning the unit on and off with the power button Open the LCD monitor and press the power button to turn on the unit. To turn off the unit  Hold down the power button until the status indicator goes off. A The status indicator lights on. Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/ viewfinder turns off the unit. Preparation How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. ∫ Touch Touch and release the touch screen to select icon or picture. ≥ Touching the touch screen will not operate while you are touching another part of the touch screen. ∫ Slide while touching Move your finger while pressing on the touch screen. 14 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 15 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 ∫ About the operation icons / / / : Touch when changing a page or performing settings. [. . . ] 477 g [with battery (supplied) and an SD card (optional)] HC-X920M Approx. 479 g [with battery (supplied)] HC-X910 Approx. 475 g [with battery (supplied) and an SD card (optional)] Operating temperature: 0 oC to 40 oC Operating humidity: 10%RH to 80%RH Battery operation time: See page 12 HC-X920 / HC-X929 / HC-X920M Wireless transmitter: Compliance standard; IEEE802. 11b/g/n Frequency range used; Central frequency 2412 MHz to 2462 MHz [11ch] Encryption method; Wi-Fi compliant WPA™/ WPA2™/WEP Access method; Infrastructure mode AC adaptor Information for your safety Power source: AC 110 V to 240 V, 50/60 Hz Power consumption: 16 W DC output: DC 9. 3 V, 1. 2 A Dimensions: 52 mm (W)k26 mm (H)k86. 3 mm (D) Mass: Approx. 115 g 26 VQT4R21 HC-X920&X920M&X910EB&EP_VQT4R21_eng. book 27 ページ ２０１２年１２月２５日　火曜日　午後６時２１分 ∫ When using 3D Conversion Lens (optional) Lens: F2. 0 (f = 1. 64 mm) 35 mm equivalent; 36 mm Minimum recording distance; Approx. [. . . ]