User manual PANASONIC HDC-HS100PC

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-HS100P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca VQT1T93 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] It is also possible not to display them. (l 68) If the gain value is increased, the noise on the screen increases. Depending on the zoom magnification, there are iris values that are not displayed. CAM FUNC 2 3 Enter the selection by pressing the camera function button. Adjust by rotating the ring. A Shutter speed: 1/60 to 1/8000 If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000. If [24pDIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR] is set to [ON], the range is 1/24 to 1/8000. ) The shutter speed closer to 1/8000 is faster. B Iris/Gain value: CLOSE # (F16 to F2. 0) # OPEN # (0dB to 18dB) Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. 4 Enter the selection by pressing the camera function button. 72 VQT1T93 Preparation Recording Playback Backup With a PC Others 74 83 92 Playback Editing With a TV VQT1T93 73 Playback 1 Motion picture playback A Lock release button B Align with the status indicator. Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. 1 2 Rotate the mode dial to select . (When playing back from an SD card) (When playing back from a HDD) Select [ ] (motion picture playback) of [ ] (card playback) tab with the cursor button. Select [ ] (motion picture playback) of [ ] (HDD playback) tab with the cursor button. E HDD playback tab F Motion picture playback C Card playback tab D Motion picture playback 74 VQT1T93 3 Select the scene to be played back and press the cursor button. 4 Select the playback operation with the cursor button. G Thumbnail display H Previous page I Next page J Play mode select button K Scene number The selected scene is played back on the full screen, and the operation icon is automatically displayed on the screen. If 9 or more scenes have been recorded, the next (or previous) page can be displayed by moving the cursor button left and right or selecting / and then pressing the cursor button. When the last scene has been selected, move the cursor button right to select the first scene. The scene number display switches to the page number, except when thumbnails are selected. Press the cursor button while selecting the play mode select button to switch to the thumbnails of the following scenes. (All scenes): Playback of all scenes (By date): Playback of scenes recorded on a selected date (l 77) (Intelligent scene selection): Playback of the detected scenes that have been recorded vividly (l 78) Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. The operation icon appears or disappears each time the cursor button is pressed. 1/;: 6: 5: : Speaker/Headphone volume adjustment Move the volume lever to adjust the speaker/ headphone volume during playback. VOL W T Towards "r": Increases the volume Towards "s": Decreases the volume Fast forward/rewind playback Move the cursor button right during playback to fast forward. (Move the cursor button left to rewind. ) The fast forward/rewind speed increases if you move the cursor button again. (The display on the screen changes from 5 to . ) Normal playback is restored when you move the cursor button up. VQT1T93 75 Operating with the remote control Press the 6 or 5 button during playback. VOL Operating with the remote control Press the E or D button during playback. SEARCH PLAY PAUSE STOP SEARCH STILL ADV SKIP SEARCH STILL ADV PLAY PAUSE SEARCH STILL ADV STILL ADV SKIP Skip playback (to the start of a scene) (Operation is possible with the remote control only. ) Press the : or 9 button during playback. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Frame-by-frame playback The motion picture is advanced one frame at a time. (Move the cursor button left to advance the frames one at a time in the reverse direction. ) Slow-motion playback 1 2 Pause the playback. (Move and hold the cursor button left to play back slow-motion pictures in reverse. ) It will playback in slow-motion while moving the cursor button. Normal playback is restored when you move the cursor button up. [. . . ] Para apagar la unidad, coloque el selector del modo en OFF. Insertar/extraer una tarjeta SD Inserción de la batería Meta la batería insertándola en la dirección señalada en la figura. A Inserte la batería hasta que dispare y se bloquee. Cómo encender la unidad Encienda la alimentación girando el selector del modo a o mientras pulsa el botón de desbloqueo A. Luz indicadora de acceso a la tarjeta [ACCESS] A Cuando esta unidad accede a la tarjeta SD, la luz indicadora de acceso se enciende. Compruebe que la lámpara de acceso a la tarjeta se haya apagado. 2) Abra la tapa de la tarjeta SD desplazando la palanca OPEN B. Coloque el lado de la etiqueta C en la dirección mostrada en la figura y empújela hasta que tope manteniéndola derecha. VQT1T93 157 Para extraer la tarjeta SD, presione en el centro de la tarjeta SD y luego tire de ella derecho hacia fuera. [. . . ]