User manual PANASONIC HDC-HS250

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-HS250P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca VQT1Y31 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] When setting both the white balance and the iris/gain, set the white balance first. AWB is not displayed on the screen when AWB is being set. Set the White Balance Mode to AWB or press the MANUAL button again to restore to the automatic adjustment. 71 VQT1Y31 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. (l 70) 1 2 Touch [SHTR] or [IRIS]. Touch / to adjust settings. 1/100 100 F WB SHTR IRIS MF SHTR Shutter speed: 1/60 to 1/8000 If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000. If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR] is set to [ON], the range is 1/24 to 1/8000. ) The shutter speed closer to 1/8000 is faster. The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode. Manual shutter speed adjustment When the shutter speed is set lower than 1/15 in the Still Picture Recording Mode, using a tripod is recommended. The shutter speed will be set to 1/30 when the power is turned on again or when the Quick Start is performed. If you increase the shutter speed manually, the noise on the screen may increase. You may see a band of light around an object that is shining very bright, or highly reflective. During normal playback, image movement may not look smooth. If you record an extremely bright object or record under indoor lighting, color and screen brightness may change or a horizontal line may appear on the screen. In this case, record in Auto Mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz. Manual iris/gain adjustment If the gain value is increased, the noise on the screen increases. Depending on the zoom magnification, there are iris values that are not displayed. IRIS Iris/Gain value: CLOSE # (F16 to F2. 0) # OPEN # (0dB to 18dB) Value closer to [CLOSE] darkens the image. Value closer to [18dB] brightens the image. When the iris value is adjusted to brighter than [OPEN], it changes to the gain value. Press the MANUAL button again to restore to the automatic adjustment. When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. 72 VQT1Y31 Manual focus adjustment If auto focusing is difficult due to the conditions, then use manual focus. (l 70) Picture adjustment Adjust the quality of the image while recording. Adjust by outputting to a TV while adjusting the quality of the image. (l 70) 1 (When MF assist function is used) Select the menu. [. . . ] . 65 152 VQT1Y31 Spanish Quick Use Guide/Guía española para el uso rápido Carga de la batería Luz indicadora de carga [CHARGE] A Encendida: Carga en curso Apagada: Carga completada 1 Conecte el cable de CA al adaptador de CA y a la toma de CA. 2 Instale la batería el adaptador de CA alineando las flechas. Insertar/extraer una tarjeta SD Inserción de la batería Meta la batería insertándola en la dirección señalada en la figura. Lámpara de acceso [ACCESS] A Cuando la unidad accede a la tarjeta SD, se enciende la lámpara de acceso. Compruebe que lámpara de acceso se haya apagado. [. . . ]