User manual PANASONIC HDC-SD100PC

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-SD100P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Guía para rápida consulta en español está incluida. For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca VQT1T64 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] When the [ ] display flashes, the manual white balance previously adjusted is stored. Whenever recording conditions change, re-set the white balance for correct adjustment. When setting both the white balance and the iris/gain, set the white balance first. VQT1T64 71 Manual shutter speed/iris adjustment Shutter Speed: Adjust it when recording fast-moving subjects. Iris: Adjust it when the screen is too bright or too dark. (l 64) 1 Press the camera function button and select [SHUTTER SPEED] or [IRIS] by rotating the ring. (l 69) Select [RETURN] with the ring, and press the camera function button again to complete the settings. Set the AUTO/MANUAL switch to AUTO to restore to automatic adjustment. When setting both the shutter speed and the iris/gain value, set the shutter speed and then set the iris/gain value. Manual shutter speed adjustment If you increase the shutter speed manually, the noise on the screen may increase. You may see a band of light around an object that is shining very bright, or highly reflective. During normal playback, image movement may not look smooth. Color or brightness of the image may change, or you may see horizontal bars in the image when the object is recorded in extremely bright place or under fluorescent light, mercury light or sodium light, etc. In this case, record in auto mode or set the shutter speed to 1/60 in areas where the power supply frequency is 60 Hz, or 1/100 in areas of 50 Hz. Manual iris/gain adjustment Luminance level and histogram are displayed during the iris adjustment. It is also possible not to display them. (l 68) If the gain value is increased, the noise on the screen increases. Depending on the zoom magnification, there are iris values that are not displayed. CAM FUNC 2 3 Enter the selection by pressing the camera function button. Adjust by rotating the ring. A Shutter speed: 1/60 to 1/8000 If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/30 and 1/8000. If [24pDIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000. (When [AUTO SLOW SHTR] is set to [ON], the range is 1/24 to 1/8000. ) The shutter speed closer to 1/8000 is faster. B Iris/Gain value: CLOSE # (F16 to F2. 0) # OPEN # (0dB to 18dB) Value closer to [CLOSE] darken the image. Value closer to [18dB] brighten the image. [. . . ] Gire el selector del modo mientras pulsa al mismo tiempo el botón de desbloqueo si cambia de OFF a otro modo. Indicador de estado B Alinee con la marca C. Para apagar la unidad, coloque el selector del modo en OFF. Insertar/extraer una tarjeta SD Inserción de la batería Meta la batería insertándola en la dirección señalada en la figura. A Inserte la batería hasta que dispare y se bloquee. Cómo encender la unidad Encienda la alimentación girando el selector del modo a o mientras pulsa el botón de desbloqueo A. Luz indicadora de acceso a la tarjeta [ACCESS] A Cuando esta unidad accede a la tarjeta SD, la luz indicadora de acceso se enciende. Compruebe que la lámpara de acceso a la tarjeta se haya apagado. [. . . ]