User manual PANASONIC HDC-SD9

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-SD9 HDC-SD9D Before use, please read these instructions completely. EP E EG VQT1N58 Information for Your Safety WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The socket outlet shall be installed near the equipment and easily accessible. [. . . ] (Move the cursor button left to rewind. ) 4 Select the playback operation with the cursor button. The fast forward/rewind speed increases if you move the cursor button again. (The display on the screen changes from 5 to . ) Normal playback is restored when you move the cursor button up. Operating with the remote control Press the 6 or 5 button during playback. VOL 1/;: 6: 5: : Playback/Pause Rewind playback Fast forward playback Stops the playback and shows the thumbnails. The operation icon appears or disappears each time the cursor button is pressed. SEARCH STILL ADV PLAY PAUSE SEARCH STILL ADV Skip playback (to the start of a scene) (Operation is possible with the remote control only. ) Press the : or 9 button during playback. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Speaker volume adjustment Move the volume lever to adjust the speaker volume during playback. Towards "r": Increases the volume Towards "s": Decreases the volume VQT1N58 61 Slow-motion playback 1 2 Pause the playback. (Move and hold the cursor button left to play back slow-motion pictures in reverse. ) Operating with the remote control 1 Press the ; button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP 2 Press the E or D button. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Normal playback is restored when you move the cursor button up. When slow-motion pictures are played back in reverse, they will be shown continuously at approximately 2/3rd the speed of normal playback (intervals of 0. 5 seconds). Operating with the remote control Press the E or D button during playback. SEARCH STILL ADV SKIP PLAY PAUSE STOP SEARCH STILL ADV SKIP Motion picture compatibility This unit is based on the AVCHD format. The video signal that can be played back on this unit is 1920k1080/50i, 1920k1080/25p or 1440k1080/50i. This unit may degrade or not play back motion pictures recorded or created on other products, and other products may degrade or not play back motion pictures recorded on this unit, even if the products support AVCHD. Sound will be heard only during normal playback. If pause play is continued for 5 minutes, the screen returns to the thumbnails. Any scenes where the thumbnails are displayed as cannot be played back. An error message appears and the screen shows the thumbnails. During motion picture playback, the power will not turn off even if the LCD monitor is closed. The remaining time for playback indication will be reset to "0h00m00s" each scene. A continuous recording of motion picture data on the SD card that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device. Frame-by-frame playback The motion picture is advanced one frame at a time. (Move the cursor button left to advance the frames one at a time in the reverse direction. ) Normal playback is restored when you move the cursor button up. When the frames are advanced one at a time in the reverse direction, they will be shown in intervals of 0. 5 seconds. 62 VQT1N58 Playing back motion pictures by date Scenes recorded on the same day can be played back in succession. 1 Select (By date), then press the cursor button. Even if scenes are recorded on the same day, they are grouped separately in the following cases. jWhen the number of scenes exceeds 99 jWhen the SD card is repaired jWhen the setting of [25pDIGITAL CINEMA] is changed* jWhen the recording mode is changed from HA/HG/HX to HE* or HE to HA/HG/HX* * ­1, ­2. . . is added after the recording date displayed on the screen. Intelligent scene selection (Extracting parts recorded clearly to play back) Motion pictures are played back after excepting some parts that may not have been recorded clearly such as image shaking or out-of-focus scenes. 2 Select the playback date, then press the cursor button. 1 Select (Intelligent scene selection), then press the cursor button. The scenes recorded on the date selected are displayed as thumbnails. Move the cursor button up or down to select the playback date. Move the cursor button left to select the last date of the previous month, and move it to the right to select the last date of the following month. 2 3 Select the scene to be played back, then press the cursor button. Select the scene to be played back, then press the cursor button. Select (All scenes) and press the cursor button to return to the playback of all scenes. [. . . ] Adjusts so that the vertical lines of a subject are seen more clearly. Attempts to bring an object with higher contrast into focus. Due to these characteristics, auto focus does not work correctly in the following situations. Record pictures in the manual focus mode. 2 000K 9) 10) 1 000K The illustration above shows the range over which the auto white balance functions. [. . . ]