User manual PANASONIC HDCTM99EC

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The socket outlet shall be installed near the equipment and easily accessible. The mains plug of the power supply cord shall remain readily operable. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle. Concerning the battery Warning Risk of fire, explosion and burns. [. . . ] The actual time can vary depending on your actual use. The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. If the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not change until the remaining time falls below 9 hours 59 minutes. When changing modes, the time indication will turn off momentarily in order to recalculate the remaining battery capacity time. When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown. Connecting to the AC outlet The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet. Important: While the DC cable is connected to the AC adaptor, the battery will not charge. Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do not use the AC cable from other equipment with this unit. A DC output terminal 1 2 3 Connect the AC cable to the AC adaptor and the AC outlet. Insert the DC cable. Always use the supplied AC adaptor or a genuine Panasonic AC adaptor (VW-AD21E-K; optional). When removing the AC adaptor, be sure to hold down the power button until the status indicator goes off. To protect SD cards, return them to their cases when you are not using them. (ENG) VQT2D12 15 Preparation Setup 3 Turning the unit on/off You can turn the power on and off using the power button or by opening and closing the LCD monitor. Turning the power on and off with the power button Press the power button to turn on the power. To turn off the power Hold down the power button until the status indicator goes off. A The status indicator lights. Turning the power on and off with the LCD monitor Power is turned on when the LCD monitor is opened, and power is turned off when it is closed. During normal use, opening and closing of the LCD monitor can be conveniently used to turn the power on/off. To turn on the power To turn off the power B The status indicator goes off. A The status indicator lights. In the following cases, opening the LCD monitor does not turn on the power. Press the power button to turn on the power. jWhen the unit is purchased jWhen you have turned off the power using the power button When not using the unit, turn off the power using the power button. 16 VQT2D12 (ENG) Preparation Setup 4 Selecting a mode Change the mode to recording or playback. Operate the mode switch to change the mode to or . Recording mode (l 22, 23) Playback mode (l 26, 27) (ENG) VQT2D12 17 Preparation Setup 5 How to use the touch screen You can operate by directly touching the LCD monitor (touch screen) with your finger. It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate with your fingers. Touch Touch and release the touch screen to select icon or picture. About the operation icons / / / : These icons are used to switch the menu and thumbnail display page, for item selection and setting etc. Touch the centre of the icon. Touching the touch screen will not operate while you are touching another part of the touch screen. About the Stylus pen The stylus pen (supplied) can be stored on the unit as shown when it is not being used. Remove the stylus pen from the unit when it is to be used. : Touch to return to the previous screen such as when setting menus Only use the supplied stylus pen. Do not tuck the stylus pen with the LCD monitor. Wipe the LCD monitor with a soft cloth, such as eye glass cleaner, when it gets dirty with finger prints and others. Do not touch the LCD monitor with hard pointed tips, such as ball point pens. [. . . ] Do not simultaneously connect an HDMI mini cable and Component cable to this unit. 1 Connect this unit to a TV. A HDMI mini cable (optional) B Component cable (supplied) C AV cable (supplied) Picture quality 1 High definition images when connecting to HDMI terminal 2 High definition images when connecting to component terminal compatible with 1080i Standard images when connecting to component terminal compatible with 576i 3 Standard images when connecting to video terminal 30 VQT2D12 (ENG) Check that the plugs are inserted as far as they go. Do not use any other cables except a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30; optional). Do not use any other component cables except the supplied one. The component terminal is for outputting images only so be sure to also connect the AV cable. [. . . ]