User manual PANASONIC HDC-Z10000

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-Z10000 Before use, please read these instructions completely. VQT3V06 Information for Your Safety Features This unit is a single body twin lens type 3D high-definition video camera. With the adoption of twin lens format, the convergence point can be adjusted within this unit, allowing to record natural and deep 3D video. (l 32) Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. About the recording format for recording motion pictures You can record motion pictures with AVCHD recording formats using this unit. [. . . ] (l 72) 1 Touch the date select icon. 3D 3D 3D B Date select icon 2 3 Touch the playback date. Touch the still picture to be played back. The still pictures recorded on the date selected are displayed as thumbnails. It will return to display all by turning off the unit or operating the mode switch. Even if still pictures are recorded on the same day, they are grouped separately when the number of still pictures exceeds 999. is displayed after the date in the list by date for the still pictures created from the motion picture. (l 77) - 78 - Playback Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. Change the mode to and touch the play mode select icon. Then, switch to the thumbnail display of the scenes or still pictures to delete. (l 72) 1 Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [DELETE] # desired setting MENU [ALL SCENES]: All the scenes or still pictures displayed as thumbnails can be deleted. (In case of playing back scenes by recording format or still pictures by date, all the scenes on the selected recording format or still pictures on the selected date will be deleted. ) [MULTI]: Multiple scenes or still pictures can be selected and deleted. [SINGLE]: Single scene or still picture can be selected and deleted. Protected scenes/still pictures cannot be deleted. 2 (When [MULTI] is selected in Step 1) Touch the scene/still picture to be deleted. When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancell the operation. Up to 99 scenes can be selected to be deleted. (When [SINGLE] is selected in Step 1) Touch the scene/still picture to be deleted. Touched scene or still picture is deleted. 3 (When [MULTI] is selected in Step 1) Touch [Delete]. To continuously delete other scenes/still pictures, repeat Steps 2-3. When you stop deleting halfway: Touch [CANCEL] or press MENU button while deleting. The scenes or still pictures that have already been deleted when the deletion is cancelled cannot be restored. To complete editing: Touch [Return] or press MENU button. - 79 - Scenes/still pictures that cannot be played back (the thumbnails are displayed as ) cannot be deleted. In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures. If you delete scenes recorded on other products or still pictures conforming to DCF standard with this unit, all the data related to the scenes/still pictures may be deleted. When still pictures recorded on an SD card by other products are deleted, a still picture (other than JPEG) that cannot be played back on this unit, may be erased. The scene or still picture that is being played back or displayed can be deleted by pressing the button on the wireless remote control while playing back or displaying the thumbnail (one scene). Screen to select [ALL SCENES], [MULTI], or [SINGLE] is displayed when the button on the wireless remote control is pressed while displaying the thumbnail (20 scenes or 9 scenes). The scene or the still picture can be deleted by selecting the item and performing steps 2 to 3. Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them. ) Change the mode to . 1 2 Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] # [YES] MENU Touch the scene/still picture to be protected. When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch the scene/still picture again to cancell the operation. [. . . ] This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard ("AVC Video") and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www. mpegla. com. Licenses SDXC Logo is a trademark of SD-3C, LLC. [. . . ]