User manual PANASONIC JETWRITER KX-P7510 Install Guide

[. . . ] · Toner cartridge · Waste toner cartridge · Print cartridge · Fuser unit · Accumulator unit · Transfer roller Please contact the reseller from which the printer was purchased. Printer component Toner cartridge Printer panel message Average life*1 5, 000 pages*2 (5% coverage) (Status)* 3 Low <Color> Toner (Have the <Color> toner cartridge available. ) TC- <Color> Replace (Replace the <Color> toner cartridge. ) The rated life expectancy of each consumable is based on printing under specific operating conditions such as page coverage for a particular page size (5% coverage per color at 600 x 600 dpi resolution on letter size paper). The actual consumables life will vary depending on its use and other printing variables including page coverage, page size, media type, print resolution, continuous or intermittent printing, number of color planes, ambient temperature and humidity. 2 Printer includes free starter toner cartridges that yield 2, 500 pages (based on 5% page coverage * per color). [. . . ] Black toner cartridge is empty. Settings and Printing Error Message WTC Replace PC-Black Not Installed PC-Color Not Installed Reset Tray1 Remove MPT Paper Front or Right door Open Toner Door Open Reset Tray1 Load Letter Load Legal Load A4 Load B5 (JIS) All Media Tray Empty Maintenance and Spec. Possible Cause Waste toner cartridge is full. Multi-purpose tray is not in closed position. Multi-purpose tray motor error has occurred. Any tray does not contain letter size media. Any tray does not contain legal size media. Any tray does not contain A4 size media. Any tray does not contain B5 (JIS) size media. All trays that are possible to feed media are empty. If the upper tray is not installed when Optional Paper Feeder(s) is installed, it is impossible to feed media from the lower tray. Network Corrective Action 55 Warning / Printer Error Messages Replace the waste toner cartridge. Remove media from the multipurpose tray. Load media in a media tray (not to be the multi-purpose tray). Load Letter in Tray1 Letter size media is not loaded in tray 1. Load letter size media in tray 1. Settings and Printing Error Message Load Legal in Tray1 Load A4 in Tray1 Load B5 (JIS) in Tray1 Tray 1 Not Installed Tray 1 Empty Load Letter in Tray2 Load Legal in Tray2 Load A4 in Tray2 Load B5 (JIS) in Tray2 Tray 2 Not Installed Tray 2 Empty Load Letter in Tray3 Load Legal in Tray3 Load A4 in Tray3 Load B5 (JIS) in Tray3 Tray 3 Not Installed Maintenance and Spec. Possible Cause Legal size media is not loaded in tray 1. A4 size plain paper is requested in the multi-purpose tray. A4 size thin paper is requested in the multi-purpose tray. A4 size thick paper/card is requested in the multi-purpose tray. A4 size transparency is requested in the multi-purpose tray. A4 size label is requested in the multi-purpose tray. Network Corrective Action 58 Warning / Printer Error Messages Load thin, letter sized paper in the multi-purpose tray. Load thick, letter sized paper/card in the multi-purpose tray. Load letter sized transparency in the multi-purpose tray. Load letter sized label in the multipurpose tray. Load coated, letter sized paper in the multi-purpose tray. Load letter sized envelope in the multi-purpose tray. Load bond/letterhead, letter sized paper in the multi-purpose tray. [. . . ] · Damaged or wrinkled paper, or paper with irregularities such as tabs, staples, etc. · Multipart forms or carbonless paper · Paper with a cotton and/or fiber content over 25% · Ink jet media (paper, transparency, etc. ) (It may transfer onto the fuser unit's roller and cause damage. ) Settings and Printing Maintenance and Spec. Network 93 Specifications !Transparencies and Labels You may also print on labels and transparencies that are made for the printer. Panasonic has tested and found that the following transparencies and labels work satisfactorily. [. . . ]