User manual PANASONIC KIT-TE35-TKE

[. . . ] Before operating the unit, please read these operating Instructions thoroughly and keep them for future reference. The included Installation Instructions should be kept and read By the installer before installation. Remote control is packaged in the indoor unit and removed By the installer before installation. Provides maximum comfort and clean air with optimal energy saving methods. [. . . ] Do not touch the sharp aluminium fin, sharp parts may cause injury. Do not switch ON the indoor unit when waxing the floor. After waxing, aerate the room properly before operating the unit. Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not dismantle the unit for cleaning purpose to avoid injury. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not place a vase or water container on the unit. Water may enter the unit and degrade the insulation. Do not open window or door for long time during operation, it may lead to inefficient power usage and uncomfortable temperature changes. Prevent water leakage by ensuring drainage pipe is: -Connected properly, -Kept clear of gutters and containers, or -Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. remote control Do not use rechargeable (Ni-Cd) batteries. to prevent malfunction or damage of the remote control: · Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. To have low noise priority operation, select the lowest fan speed ( ). POWERFUL: To reach the preset temperature quickly ?This operation stops automatically after 20 minutes. This operation provides you with a comfortable environment while sleeping. It will automatically adjust the sleep pattern temperature during the activation period. The indoor unit indicator will dim when this operation is activated. [. . . ] Airflow continues even after operation has stopped. Extraction of remaining heat from the indoor unit (maximum 30 seconds). Operation is delayed a few minutes after restarting. The delay is a protection to the unit's compressor. [. . . ]