User manual PANASONIC KIT3E7712JBE

[. . . ] ⷠDo not attempt to repair the unit by yourself. Do not install the unit in a potentially explosive atmosphere. ⷠDo not wash the unit with water, benzene, thinner or scouring powder. ⷠDo not use for other purposes such as preservation of food. [. . . ] After waxing, aerate the room properly before operating the unit. ⷠDo not install the unit in oily and smoky areas. Multi Split Outdoor Unit (CU-2E15GBE, CU-2E18CBPG, CU-3E18EBE, CU-3E18JBE, CU-3E23CBPG, CU-4E27CBPG, CU-4E23JBE) DEFINITION Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. The operation mode priority is given to the first unit that turned on. ⷠDuring operation, heating and cooling mode could not be activated at the same time for different indoor unit. The power indicator blinks to indicate the indoor unit is standing by for different operation mode. And operations could be activated even when the air-conditioner is turned off. In this condition, once e-ion indicator is ON, the unit will operate with AUTO fan speed and air swing. However, this operation could not be activated or will be deactivated if other indoor unit is activating heating mode. E-ion AIR PURIFYING SYSTEM Do not touch during operation e-ion filters e-ion charging wire Active e-ion Generator Auto OFF/ON button · Press and hold until 1 beep is heard, then release. Press and hold until 1 beep is heard, then release. Press again until 2 beeps, then release. Please be aware of the OFF indication on the remote control display to prevent the unit from starting/ stopping improperly. Operating the unit within the recommended temperature could induce energy saving. During operation mode selection the power indicator blinks. ⷠUnit selects operation mode every 30 minutes according to temperature setting, outdoor and room temperature (For single Split System). ⷠUnit selects operation mode every 3 hours according to temperature setting, outdoor and room temperature (For Multi split system). hEAT mode - To enjoy warm air · Unit takes a while to warm up. The power indicator blinks during this operation. cOOL mode - To enjoy cool air DRY mode - To dehumidify the environment · Unit operates at low fan speed to give a gentle cooling operation. tO SELECT FAN SPEED (5 OPTIONS) TO ENJOY CLEAN & FRESH AIR · Generates negative ions to produce fresh air effect and attract dust which will then be captured at the positively charged e-ion filters. This operation reduces air dryness and provides you with a comfortable living environment. [. . . ] This may due to damp smell emitted by the wall, carpet, furniture or clothing. Extraction of remaining heat from the indoor unit (maximum 30 seconds). The unit is in defrost mode, and the melted frost is drained from the outdoor unit. This is a preliminary step in preparation for the operation when the ON timer has been set. [. . . ]