User manual PANASONIC KX-F50

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). Attach your purchase receipt here. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. [. . . ] 2 Scroll to "Ringer setting" by pressing [d] or [B], then press Select. Ringer setting Incoming call. KBack dB SelectL 3 Scroll to "Incoming call. " by pressing [d] or [B], then press Select. KBack dB SelectL 4 Select "On", "Off" or "2" by pressing [d] or [B]. Incoming call tone :2 KBack dB SaveL 5 Press Save, then press [OFF]. Base unit incoming call tone Handset 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Set base unit KBack dB SelectL 3 Scroll to "Set base unit" by pressing [d] or [B], then press Select. KBack dB SelectL 4 Scroll to "Incoming call. " by pressing [d] or [B], then press Select. Incoming call. KBack dB SelectL 5 Select "On", "Off" or "2" by pressing [d] or [B]. Incoming call tone :2 KBack dB SaveL 6 Press Save, then press [OFF]. 46 Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Key tone KBack dB SelectL 3 Scroll to "Key tone" by pressing [d] or [B], then press Select. KBack dB SelectL Telephone System 4 Select "Off" or "On" by pressing [d] or [B]. Key tone :On KBack dB SaveL 5 Press Save, then press [OFF]. Re-registering the Handset Handset & Base Unit If "No link to base. Move closer to base, try again. " is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to the base unit. · Make sure the base unit is not being used. · Have both the handset and base unit nearby during registration. · Follow steps 1 and 2 listed below. To decrease the volume, press VOLUME [<]. To answer a call while monitoring, press [C] or [s] on the handset. To turn the incoming call monitoring feature off When the base unit is not in use, press [GREETING CHECK], then press VOLUME [<] repeatedly until "0" is displayed. (Make sure the Answering System is turned on. ) OR While monitoring, press VOLUME [<] repeatedly until "0" is displayed. · If the incoming call monitoring feature is turned off, it will remain off when the next call is monitored. · If you adjust the speaker volume while playing back messages, the speaker volume for monitoring will be turned on again. To turn the speaker volume off, see "To turn the incoming call monitoring feature off" of above step. Answering System 49 For assistance, please call: 1-800-211-PANA(7262) Listening to Messages Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 14). Using the Base Unit Base Unit You can see the total number of recorded messages on the base unit display. If the NEW MESSAGE indicator flashes on the base unit, new messages have been recorded. To play back messages Press [MESSAGE]. · The unit announces the number of new messages and only new messages are played back. · When you have no new messages, the unit announces "No new messages. All message playback" and plays back all messages. · When you have no messages, the unit announces "No messages". NEW MESSAGE Indicator [MESSAGE] · During playback, the display shows the message number. [. . . ] For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]