User manual PANASONIC KX-FPG176

[. . . ] Compact Plain Paper Fax with 2. 4GHz Cordless and Answering System Operating Instructions Model No. KX-FPG176 FOR FAX ADVANTAGE ASSISTANCE: CALL 1-800-HELP-FAX (1-800-435-7329) E-MAIL TO consumerproducts@panasonic. com for customers in the U. S. A. or Puerto Rico REFER TO www. panasonic. com for customers in the U. S. A. or Puerto Rico Please read these Operating Instructions before using the unit and save for future reference. This model is designed to be used only in the U. S. A. Thank you for purchasing a Panasonic facsimile. Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Dealer's name and address Dealer's telephone number Serial number (found on the rear of the unit) Caution: The Telephone Protection Act of 1991 requires the following information to be clearly stated either at the top or bottom margin of the first message page when transmitting messages via telephone facsimile: -- date and time of transmission, -- identification of the business, entity or person(s) sending the facsimile, and -- telephone number of the business, entity or person(s). [. . . ] If the arrow (w) is not shown on the right of the display, turn it on by pressing PQ. q The unit will play the pre-recorded greeting message. q The display will show the ring setting in TAD/FAX mode. Display: PICKUP &RCV CALL AFTER 2 RINGS[] 3 If you wish to change the ring setting, press + or - until the desired setting (see below) is displayed, and press w. q You can adjust the speaker volume after changing the ring setting. Press + or - while listening to the greeting message. q The remaining time for recording incoming messages will be displayed. Example: _TIME_=_10m13s AUTO ANSWER SET Ring setting in TAD/FAX mode You can choose from 1, 2, 3, 4, TOLL SAVER and RINGER OFF. This setting can be changed by feature #06 on page 68. TOLL SAVER: When you call the unit from a remote location, the number of rings will tell you if there are any new voice messages. If the unit answers on the 2nd ring, there is at least one new recorded message. If the unit answers on the 4th ring, there are no new recorded messages. To save the toll charges for the call, hang up immediately when you hear the 3rd ring. The 3rd ring indicates that there are no new recorded messages. RINGER OFF: The unit will answer without ringing. q Note: If the arrow (w) is already shown on the right of the display and you wish to change the ring count, turn it off once then on again by pressing PQ and follow the instructions in step 3. q The incoming message recording time can be changed (feature #10 on page 69). q When the remaining time is low, erase unnecessary messages (p. For the voice memory capacity of incoming messages, see page 96. q While an incoming call is being recorded, you can monitor it through the speaker. If this feature is not required, set feature #67 to off (p. 74). q If you subscribe to a Caller ID service, set to 2 or more rings. 54 Greeting Recording your own greeting messages! You can record your own greeting messages for TAD/FAX and TEL/FAX modes. When receiving a call, your own greeting message will be played instead of the pre-recorded message. [. . . ] If your original unit is not eligible for warranty service, your card will be charged for the non-warranty repair of the unit at Panasonic's current rate for parts and labor and for any shipping charges associated with this program. If you do not wish to pay out-of-warranty repair costs, you will be responsible for returning the replacement unit to Panasonic and for paying all shipping charges associated with this program including the UPS delivery of the replacement product to you, shipment of the problem unit to Panasonic, shipment of the replacement unit back to Panasonic and the return of your original unit back to you. Credit status will be verified prior to sending the replacement product. See dealer for limited warranty details. [. . . ]