User manual PANASONIC KX-MB3020

[. . . ] Operating Instructions Multi-Function Printer Model No. This pictured model is KX-MB3010. KX-MB3010 KX-MB3020 Do NOT connect the unit to a computer with the USB cable until prompted by the MultiFunction Station (CD-ROM). 1 2 For hearing or speech impaired TTY users, TTY: 1-877-833-8855 KX-MB3020 only: L This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. Thank you for purchasing a Panasonic product. You can select English or Spanish for the language. The display and reports will be in the selected language. [. . . ] {1} "LETTER" (default): Letter-size paper {2} "A4": A4-size paper {3} "LEGAL": Legal-size paper {1} "PLAIN PAPER" (default): 75 g/m2 to 90 g/m2 (20 lb to 24 lb) paper. {2} "THIN PAPER": 64 g/m2 to 75 g/m2 (17 lb to 20 lb) paper. {3} "THICK PAPER": 90 g/m2 to 165 g/m2 (24 lb to 44 lb) paper. Note: L This setting is valid for both the standard input tray and the lower input tray. L "THICK PAPER" will not be displayed if any of the paper input tray settings are changed to "#2" or "#1+#2": ­ fax (feature #440 on page 61) (KX-MB3020 only). ­ PCL® (feature #760 on page 64) (KX-MB3020 only). ­ scan to email print feature (feature #565 on page 69). To set the length of time before the unit enters power save mode. {1} "5min": 5 minutes {2} "15min" (default): 15 minutes {3} "30min": 30 minutes {4} "1h": 1 hour Note: L When in power save mode, the unit needs to preheat the fuser unit before it can begin printing. Holding the previous contrast setting {#}{4}{6}{2} {0} "DISABLED" (default): Deactivates this feature. {1} "ENABLED": The unit will hold the previous setting. Note: L The previous setting will be held individually for copying. L The previous setting will be held individually for sending faxes (KX-MB3020 only). To select the default operation mode when the selected time of the mode timer (feature #464) passes. {1} "COPY" (default): Copy mode is selected as default. {2} "FAX": Fax mode is selected as default. Note: L You cannot select the scan mode using this feature. To set the timer before returning to the default operation mode (feature #463). {0} "OFF": Deactivates this feature. {1} "30s": 30 seconds {2} "1min" (default): 1 minute {3} "2min": 2 minutes {4} "5min": 5 minutes {0} "OFF" (default): Deactivates this feature. {1} "ON": The toner cartridge will last longer. Note: L This feature may lower the print quality by reducing toner consumption. [. . . ] Neither the name of the University nor the names of its contributors may be used to endorse or * promote products derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ L This product contains NetBSD software and is using it based on the following license conditions. /** Copyright (c) 1990 The Regents of the University of California. [. . . ]