User manual PANASONIC KX-T2375SUW

[. . . ] Integrated Telephone System Preparation Model No. KX-T2375SUW Pulse-or-tone dialing capability Operating Instructions Basic Operation Advanced Operation Useful Information PLEASE READ BEFORE USE AND SAVE. Before Initial Use Thank you for purchasing your new Panasonic integrated telephone. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer Accessories (included) Handset . 12) 2 Contents Preparation Location of Controls . 16 Connecting the Handset/Telephone Line Cord . [. . . ] The unit will return to the standby mode. 19 " One-Touch Dialer Dialing a Stored Number From an UPPER memory location: 1 2 OR Lift the handset or press (SP-PHONE/HEADSET). Press the required one-touch auto dial button. The stored number is displayed and dialed. From a LOWER memory location: 1 2 3 Lift the handset or press (SP-PHONE/HEADSET). Press (AUTO/LOWER). Press the required one-touch auto dial button. The stored number is displayed and dialed. Memory card Remove the memory card and use it as a name or phone number index for the stored numbers. Cover Memory Card 20 Special Features (DIAL\LOCK) (PROGRAM) (TONE) (PAUSE) (FLASH) (HOLD) (MUTE) " For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. The first call is put on hold and you can answer the second call. To return to the first caller, press (FLASH) again. If this function does not operate properly, consult your telephone company. Advanced Operation Temporary Tone Dialing (For Rotary or Pulse Service Users) Press (TONE) before entering access numbers which require tone dialing. " " is displayed. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (PAUSE) if a pause is required for dialing with a PBX or to access a long distance service. Line access number (9) (PBX) (9) ¤ (PAUSE) ¤ Phone number Pressing (PAUSE) once creates a few seconds pause. This prevents misdialing when you redial or dial a stored number. Pressing (PAUSE) more than once increases the length of the pause between numbers. 21 " Special Features Muting Your Conversation Press (MUTE) while talking. " " is displayed. The other party cannot hear you but you can hear them. To resume the conversation, press (MUTE) again. Turning Music Played During the Hold ON/OFF You can turn ON/OFF playing music during the hold as follows. Your phone comes from the factory set to ON. Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). Press (MUTE). Press (4). The current setting is displayed. To turn OFF, press (2). The unit will return to the standby mode. 22 " FLASH Button Pressing (FLASH) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. Selecting the flash time The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "80, 90, 100, 110, 200, 250, 300, 400, 600, 700 ms (milliseconds)". Your phone comes from the factory set to "600 ms". Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). Press (MUTE). Press (2). The current setting is displayed. Advanced Operation Press a dialing button ((1) to (0)). (1) : 80 ms (5) : 200 ms (9) : 600 ms (2) : 90 ms (6) : 250 ms (0) : 700 ms (3) : 100 ms (7) : 300 ms (4) : 110 ms (8) : 400 ms Press (PROGRAM). A long beep sounds. The unit will return to the standby mode. If you are connected via a PBX, a longer flash time may be necessary to use PBX functions (transferring a call, etc. ). Consult your PBX installer for the correct setting. 23 " Special Features Setting the PIN Code A 4-digit PIN Code (Personal Identification Number) prevents unauthorized persons from using your unit. The PIN Code is required for the dial lock and call restriction to be set or canceled. The factory preset PIN code is "1111". Make sure that a call is not put on hold. 1 2 3 4 5 Press (PROGRAM). Press (MUTE). Press (5). Enter the current PIN code. "1111" is entered. ) Press (PROGRAM). If a correct PIN code is entered, a beep will sound. [. . . ] Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed. Exercise care in handling the battery(ies) in order not to short the battery(ies) to conductive materials such as rings, bracelets, and keys. The battery(ies) and/or conductor may overheat and cause burns. [. . . ]