User manual PANASONIC KX-T7130

[. . . ] Consulte "Guía Rápida Española", página 44. You must subscribe to the appropriate service offered by your service provider/telephone company. For assistance, visit our Web site: http://www. panasonic. com/help for customers in the U. S. A. Please register your product: http://www. panasonic. com/prodreg Table of Contents Introduction Model composition . [. . . ] To exit, press {OFF}. Note: L If the entry has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. 24 For assistance, please visit http://www. panasonic. com/help Caller ID Service Editing a caller's phone number before calling back You can edit a phone number in the caller list by removing its area code and/or the long distance code "1". same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the handset to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller's area code are edited automatically. This feature can be set for each handset (page 21). Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. 1 2 {<} CID {V}/{^}: Select the desired entry. L If > is displayed, not all of the information is shown. To see the remaining information, press {>}. To return to the previous screen, press {<}. L If new messages have been recorded, the base unit plays back new messages. L If there are no new messages, the base unit plays back all messages. 7 8 Using a pre-recorded greeting message If you erase or do not record your own greeting message, the unit plays a prerecorded greeting asking callers to leave a message. Resetting to a pre-recorded greeting message If you want to use a pre-recorded greeting message once you record your own greeting message, you need to erase your own greeting message. Operating the answering system during playback Key {^} or {V} {7} {8} {} (STOP) {ERASE} Operation Adjust the speaker volume Repeat message*1 Skip message Stop playback Erase currently playing message 1 2 28 {MENU} {V}/{^}: "Answering device" i {OK} For assistance, please visit http://www. panasonic. com/help Answering System *1 If pressed within the first 5 seconds of a message, the previous message is played. Key {5} {6} Operation Play all messages Play greeting message Record greeting message Turn answering system on Pause message*2 Stop recording Stop playback Turn answering system off Erase currently playing message Erase all messages Reset to a prerecorded greeting message Erasing all messages Press {ERASE} 2 times while the unit is not in use. {7}{6} {8} Listening to messages using the handset When new messages have been recorded "New message" is displayed. {MENU} {9} {0} {*}{4}*3 {*}{5}*4 {*}{6} 1 2 3 4 {MENU} {V}/{^}: "Answering device" i {OK} {V}/{^}: "Play new msg. " or "Play all msg. " i {OK} When finished, press {OFF}. Note: L To switch to the receiver, press {C}. Operating the answering system {MENU} i {V}/{^}: "Answering device" i {OK} Key {^} or {V} Operation Adjust the receiver/speaker volume (during playback) Repeat message (during playback)*1 Skip message (during playback) Enter the "Settings" menu Play new messages *1 If pressed within the first 5 seconds of a message, the previous message is played. *2 To resume playback: {V}/{^}: "Playback" i {OK} *3 You can also erase as follows: {CLEAR} i {V}/{^}: "Yes" i {OK} *4 You can also erase as follows: {MENU} i {V}/{^}: "Erase all" i {OK} i {V}/{^}: "Yes" i {OK} {1} or {<} {2} or {>} {3} {4} Calling back (Caller ID subscribers only) If caller information is received for the call, you can call the caller back while listening to a message. 1 2 Press {MENU} during playback. {V}/{^}: "Edit & Call" i {OK} L To edit the number before calling back, press {MENU} repeatedly For assistance, please visit http://www. panasonic. com/help 29 Answering System until the phone number is shown in the desired format (page 25). 6 {OK} i {OFF} 3 {C} Erasing all messages 1 {MENU} 2 {V}/{^}: "Answering device" i {OK} Deactivating remote operation Press {*} in step 5 on "Remote access code", page 30. L The entered remote access code is deleted. 3 4 {V}/{^}: "Erase all msg. " i {OK} {V}/{^}: "Yes" i {OK} i {OFF} Using the answering system remotely 1 Dial your phone number from a touch-tone phone. 2 Remote operation Using a touch-tone phone, you can call your phone number from outside and access the unit to listen to messages or change answering system settings. The unit's voice guidance prompts you to press certain dial keys to perform different operations. After the greeting message starts, enter your remote access code. L The unit announces the number of new messages. L The voice guidance announcements are different depending on the voice guidance language setting (page 14). [. . . ] Ship-In Service For assistance in the continental United States and Puerto Rico in obtaining repairs please ship the product prepaid to: PSTC (Panasonic) Exchange Center, 4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503 panacare@us. panasonic. com When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. [. . . ]