User manual PANASONIC KX-TCD200E

[. . . ] TCD200E(e-e). book Page 1 Wednesday, February 9, 2005 2:58 PM Operating Instructions Digital Cordless Phone Model No. KX-TCD200E This unit is Caller ID compatible. To display the caller's phone number, you must subscribe to Caller ID service. Charge the batteries for about 7 hours before initial use. Please read these operating instructions before using the unit and save them for future reference. TCD200E(e-e). book Page 2 Wednesday, February 9, 2005 2:58 PM Introduction Introduction Thank you for purchasing a new Panasonic digital cordless phone. For your future reference Attach or keep original receipt to assist with any repair under warranty. [. . . ] The number will stop flashing. Changing the display language 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 7 Press {ih}. Note: L If a call is received from one of the categories set to bypass night mode, only the handset will ring. 3 Select "Display Setup", then press {>}. 4 Select "Select Language", then press {>}. 5 Select the desired language, then press {>}. 6 Press {ih}. Display setup Selecting the standby mode display "Base Number": The current base unit number is displayed. "Handset Number": The current handset number is displayed. "Off": Only the current date and time are displayed. Note: L If you select a language you cannot read, press {ih}, {j/OK}, press {e} 2 times, press {>}, press {v} 2 times, press {>}, press {v}, press {>}, select the desired language, then press {>}. Press {ih}. Changing the display contrast 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 3 Select "Display Setup", then press {>}. 3 Select "Display Setup", then press {>}. 4 Select "Contrast", then press {>}. Helpline Tel. 01289 8333 21 TCD200E(e-e). book Page 22 Wednesday, February 9, 2005 2:58 PM Handset Settings 5 Press {e} or {v} repeatedly to select the desired contrast, then press {>}. 6 Press {ih}. Other options Changing the handset PIN (Personal Identification Number) For security, the handset PIN must be entered when changing certain settings. Important: L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. Call options Turning call bar on/off This feature prohibits making outside calls. When call bar is turned on, only intercom calls and calls to emergency numbers (page 26) can be made. 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 3 Select "Call Options", then press {>}. 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 4 Select "Call Bar", then press {>}. 5 Enter "0000" (default handset PIN). L If you changed the PIN, enter it (page 22). 3 Select "Other Options", then press {>}. 4 Select "Handset PIN", then press {>}. 6 Select "On" or "Off", then press {>}. 7 Press {ih}. Note: L When call bar is turned on, o is displayed. 5 Enter the current 4-digit handset PIN. 6 Enter the new 4-digit handset PIN, then press {j/OK}. 7 Press {ih}. Turning keytones on/off Keytones are tones heard when keys are pressed. Includes confirmation tones and error tones. Turning auto talk on/off When this feature is turned on, you can answer calls simply by lifting the handset off the base unit. You do not need to press {C}. 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 1 Press {j/OK}. 2 Select "Handset Setup", then press {>}. 3 Select "Other Options", then press {>}. 3 Select "Call Options", then press {>}. 4 Select "Auto Talk", then press {>}. [. . . ] 130 g Note: L Specifications are subject to change. L The illustrations used in these operating instructions may differ slightly from the actual product. Helpline Tel. 01289 8333 41 TCD200E(e-e). book Page 42 Wednesday, February 9, 2005 2:58 PM Useful Information Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. [. . . ]