User manual PANASONIC KX-TG2208

[. . . ] one Order No. PQJA10075Z Antenna Antenna (4-F) IN USE Indicator (2-B, 3-B) Battery . one (2-A, 2-B) Order No. N4HHEPA00001 (HHR-P513) Handset Cover . one [ Order No. PQKK10136Z2 Belt Clip . one Order No. PQKE10361Z2 [SP-PHONE] (Speakerphone/ Channel) (2-A) Headset Jack (4-D) Shoulder Rest Attachment . [. . . ] A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. RECHARGE Indicator 3-B Handset Locator You can locate the handset or page the handset user with beep tones from the base unit. 1 Press [HANDSET LOCATOR] on the base unit. The Talk/Ringer and Ringer indicators on the handset and the IN USE indicator on the base unit flash and the handset beeps for 1 minute. 2 To stop paging, press [HANDSET LOCATOR] again or press [OFF] on the handset. Battery information After your Panasonic battery is fully charged: 3-C Temporary Tone Dialing (For Rotary or Pulse Service Users) Press [ ] (TONE) before entering access numbers which require tone dialing. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to pulse. Operation While in use (TALK) While not in use (Standby) Operating time Up to about 5 hours Up to about 11 days The battery operating time may vary depending on usage conditions and ambient temperature. Clean the charge contacts of the handset and the base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly. If the battery is fully charged, you do not have to place the handset on the base unit until the RECHARGE indicator flashes. The battery cannot be overcharged. 3-D For Call Waiting Service Users Press [FLASH/CALL WAIT] if you hear a call-waiting tone while talking. The first call is put on hold and you can answer the second call. To return to the first caller, press [FLASH/CALL WAIT] again. Call waiting service cannot be used when a parallel connected telephone is in use. If this function does not operate properly, consult your telephone company for details. 4-B Belt Clip You can hang the handset on your belt or pocket using the included belt clip. To attach the belt clip To remove the belt clip For assistance, please call: 1-800-211-PANA(7262) Things You Should Know 4-C Shoulder Rest Attachment " Use the shoulder rest attachment if you need to keep your hands free during a phone conversation. To attach the shoulder rest attachment Attach the included belt clip to the handset (4-B), then attach the shoulder rest attachment to the belt clip as shown below. You will hear a click when the shoulder rest attachment is in place. To remove the shoulder rest attachment Slide the base of the attachment in the direction of the arrow as shown below. 4-D Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on section 1-A. Connecting an optional headset to the handset Open the headset jack cover, and insert the headset plug into the headset jack as shown below. Headset Jack Headset sold separately. To switch to the speakerphone while using the headset: Press [SP-PHONE]. To return to the headset, press [ ]. For assistance, please call: 1-800-211-PANA(7262) 4 1 Things You Should Know 4-F Base Unit Location/Noise Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2). " 4-E Wall Mounting This unit can be mounted on a wall phone plate. 1 Calls are transmitted between the base unit and the handset using wireless radio waves. For maximum distance and noise-free operation, the recommended base unit location is: Away from electrical appliances such as a TV, personal computer or another cordless phone. 2 1 In a HIGH and CENTRAL location with no obstructions such as walls. 2 Connect the AC adaptor. Fasten the AC adaptor cord to prevent it from being disconnected. Hook Raise the antenna. To Power Outlet Note: If you use the handset near a microwave oven which is being used, noise may be heard from the receiver or the speaker. Move away from the microwave oven and closer to the base unit. If a power failure occurs, programmed information may be erased. Problem You cannot redial. Section 4 Cause & Remedy If the last number dialed was more than 32 digits long, the number will not be redialed correctly. [. . . ] Para encender el timbre, presione [M] o [L]. El timbre sonará en un nivel BAJO. Micrófono [HANDSET LOCATOR] Cuando el indicador RECHARGE parpadee o la unidad emita pitidos intermitentemente, cargue la batería. Para hacer llamadas 1. Presione [ ] y luego marque el número de teléfono. O Para tener una conversación con las manos libres, presione [SP-PHONE] y marque el número de teléfono. [. . . ]