User manual PANASONIC KX-TG2237

[. . . ] 2. 4GHz Digital Cordless Phone Preparation Model No. KX-TG2237S Pulse-or-tone dialing capability Operating Instructions Basic Operation Advanced Operation Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Charge the battery for about 15 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on page 67 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Caller ID and Call Waiting Service and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on the phone line with the first caller, requires a subscription to both Caller ID and Call Waiting Service. [. . . ] This feature enables you to transfer a call between the handset and the base unit. From the handset to the base unit From the base unit to the handset 1 2 Handset: During a call, press (HOLD/INTERCOM/CLEAR). ·The call is put on hold and "Hold" is displayed. 1 2 Base unit: During a call, press (HOLD/LOCATOR/INTERCOM). ·The call is put on hold and SP-PHONE indicator flashes. Handset: Press (HOLD/INTERCOM/CLEAR) Base unit: Press (HOLD/LOCATOR/INTERCOM) again. ·"Paging Press INTERCOM" is displayed on the handset. ·If the handset user does not answer, press (SP-PHONE) to return to call. Advanced Operation again. Talk to the paged party after the beeps. ·"Intercom hold" is displayed. ·If the base unit user does not answer, press or to return to call. 3 4 Base unit: When the paging party's voice is heard, answer using the MIC. Base unit: To answer the call, press (SP-PHONE). ·The transfer is complete. 3 4 Handset: Press (HOLD/INTERCOM/CLEAR) to answer the page. ·"Intercom hold" is displayed. Handset: To answer the call, press or . ·The transfer is complete. For assistance, please call: 1-800-211-PANA(7262) 47 Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically when your line is busy or if calls are not answered. Callers can leave messages by following the pre-recorded instructions. When voice mail messages are recorded, "Voicemail" will be displayed and the VM (Voice mail) indicator will flash. To use this feature, you must first store your access number. Storing a Voice Mail Access Number Make sure the unit is not being used and the handset is lifted off the base unit. Press (FUNCTION). 1 2 3 4 5 6 7 8 Scroll to "Program" by pressing Ö or Ñ. Scroll to "Save mailbox#" by pressing Ö or Ñ. Enter your access number, up to 32 digits. ·You may enter pauses*. ·Each time you press (HOLD/INTERCOM/CLEAR), a digits is erased. To erase all digits, press and hold (HOLD/INTERCOM/CLEAR). Ringer pattern HProgram -------------- Set flash time HSave mailbox# Voicemail tone 1234567PPP890 IH G=Next Press Ö (Next key). ·If you want to edit the entered number, press Ñ (Edit key) and return to step 6. 1234567PPP890 F=Edit H=Save Press á (Save key). ·To exit the programming mode, press (OFF). 1234567PPP890 Save mailbox# ·You can exit the programming mode any time by pressing (OFF). To erase a stored number Repeat steps 1 through 5 \ Press and hold (HOLD/INTERCOM/CLEAR) until all of the digits are erased \ Ö (Next key) \ á (Save key). ·A beep sounds. 48 *For quick access to your voice mail box by using (FLASH/CALL!WAIT/VOICE!MAIL) or (VM), you may add pauses between your voice mail box access number and your mail box password in step 6. 1-222-333-4444 PPPP 8888 Your mail box password Pauses Pressing (REDIAL/PAUSE) once creates a 3. 5 seconds delay and counts as one digit. The delay time depends on a telephone company. Your voice mail box access number Setting the Voice Mail Tone If your voice mail service sends a voice mail tone after a new message has been recorded, set to "On". [. . . ] 22 Muting a conversation . . . . . . . . . . . . . . . . . 51 N Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 O openLCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 P PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]