User manual PANASONIC KX-TG2480

[. . . ] TG2480(e). book Page 1 Monday, August 7, 2006 10:32 AM Operating Instructions 2. 4 GHz Digital Cordless Phone Model No. KX-TG2480 This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] Once you have stored your Voice Mail access number, you can dial it automatically by pressing {VM} (page 34). To erase the Voice Mail access number Repeat steps 1 to 5, then press and hold {Clear} until all digits are erased. Press {Save}, then press {OFF}. Voice Mail (VM) tone detection Your telephone company sends special signals (sometimes called "Voice Mail tones" or "stutter tones") to the unit to let you know you have new Voice Mail messages. If you hear a series of dial tones followed by a continuous dial tone after you press {C} or {s}, you have new Voice Mail messages. Minutes after you hang up a call or after the phone stops ringing, your unit will check the phone line to see if new Voice Mail messages have been recorded. Turn this feature off when: ­ You do not subscribe to Voice Mail service. ­ Your telephone company does not send Voice Mail tones. If you are not sure which setting is required, consult your telephone company. 1 2 3 4 5 6 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Voice Mail" by pressing {V} or {^}, then press {Select}. Scroll to "Store VM access#" by pressing {V} or {^}, then press {Select}. Press {V} or {^} to select the desired line. Enter the correct number. For assistance, please visit http://www. panasonic. com/consumersupport 33 TG2480(e). book Page 34 Monday, August 7, 2006 10:32 AM Voice Mail Service Turning VM detection on/off Note: L If "Voice Mail" still remains on the display even after you have listened to new messages, turn it off by pressing and holding {OFF} until the handset beeps. L If your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages. L If your Voice Mail service uses Voice Mail tones, the tones will be heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually. 1 2 3 4 5 6 7 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {Select}. Scroll to "Voice Mail" by pressing {V} or {^}, then press {Select}. Scroll to "VM tone detect" by pressing {V} or {^}, then press {Select}. Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. Message alert You can select whether or not the message indicator on the handset will flash when new messages have been recorded. The default setting is OFF. Listening to Voice Mail messages The unit will let you know that you have new Voice Mail messages in the following ways: ­ The V. M. ­ "Voice Mail" will be displayed on the handset. [. . . ] When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. For assistance, please visit http://www. panasonic. com/consumersupport 55 TG2480(e). book Page 56 Monday, August 7, 2006 10:32 AM Useful Information Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]