User manual PANASONIC KX-TG2970B

[. . . ] 2. 4 GHz Expandable Cordless Answering System Operating Instructions Model No. KX-TG2970 Pulse-or-tone dialing capability This unit is ADT security system compatible. To use the function of ADT security system, you must subscribe to ADT. To display the caller's name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Thank you for purchasing your new Panasonic cordless telephone. [. . . ] Press [DIGITAL SP-PHONE], [ ] or [ ] to return to the outside call. To transfer the call to another extension, repeat from step 1. OR To transfer the call to the Answering System to allow the caller to leave a message, press [LOCATOR/INTERCOM/TRANSFER] or [HOLD] (INTERCOM), then press [9] to transfer the caller to the Answering System (p. (The caller will hear the greeting and can leave a message after the beep. ) Telephone System Quick call transfer You can transfer a call without waiting for the paged party to answer. Base unit: During a call, press [LOCATOR/INTERCOM/TRANSFER], and press the extension number ([1] to [3]) or press [0] to page all extensions, then place the handset on the cradle or press [DIGITAL SP-PHONE] to hang up. Cordless handset: During a call, press [HOLD] (TRANSFER) and press the extension number ([0] for the base unit, [1] to [3] for the cordless handset), then press [OFF] to hang up. · The call will be transferred directly. · The paged party can take the transferred call by pressing [ ], [ ] or [DIGITAL SP-PHONE], or by lifting the base unit handset. · After the paged party answers, the transfer is complete. · If the paged party does not answer: ­for the base unit, lift the handset or press [DIGITAL SP-PHONE] to return to the outside call. ­for the cordless handset, press [ ] or [ ] to return to the outside call. · If the paged party does not answer within 60 seconds after you hang up, your phone will ring and the call will be returned to your phone. You may speak to the caller again by lifting the base unit handset or pressing [DIGITAL SP-PHONE], [ ] or [ ]. If you do not answer the call within 4 minutes, the call will be disconnected. After speaking to the caller, you may also transfer the caller to the Answering System by performing the following steps: (1) Press [LOCATOR/INTERCOM/TRANSFER] on the base unit or [HOLD] (TRANSFER) on the cordless handset. (2) Press [9] to transfer the caller to the Answering System (p. (The caller will hear the greeting and can leave a message after the beep. ) For assistance, please call: 1-800-ADT-ASAP 49 Conference Calls While you are talking with an outside caller, you can call the base unit or the cordless handset to make a conference call. When the system has one or more additional cordless handsets (p. 27), you can make a conference call with your cordless handset and another cordless handset. Base Unit 1 During a call, press [LOCATOR/INTERCOM/ TRANSFER]. · The call is put on hold. Handset 1 During a call, press [HOLD] (INTERCOM). · The call is put on hold. 2 To page the cordless handset, press the extension number ([1] to [3]). 2 To page the base unit, press 3 When the paged party answers, press [CONF] on your unit to make a conference call. [0]. To page another cordless handset, press the extension number ([1] to [3]). answers, press [CONF/ FUNCTION] on your unit to make a conference call. 3 When the paged party · To leave the conference, place the base unit handset, or press [DIGITAL SP-PHONE] on the base unit or press [OFF] on the cordless handset. The 2 other parties can continue the conversation. · During a conference, the outside call can be placed on hold by pressing [HOLD] on the base unit or [HOLD] (INTERCOM) on the cordless handset. Internal communications between extensions are not suspended. [. . . ] 7. 2 W 2. 40 GHz ­ 2. 48 GHz (3 21/32" x 9 27/32" x 7 5/8") Dimensions (H x W x D): Approx. 93 mm x 250 mm x 194 mm Mass (Weight): Approx. 760 g (1. 68 lb. ) N Charger Power Supply: Power Consumption: AC adaptor (120 V AC, 60 Hz) Standby: Maximum: Approx. 4. 0 W Dimensions (H x W x D): Approx. [. . . ]