User manual PANASONIC KX-TG5673

[. . . ] TG5671_72_73(e). book Page 1 Wednesday, January 11, 2006 7:03 PM Operating Instructions 5. 8 GHz Digital Cordless Answering System Model No. KX-TG5671 5. 8 GHz Expandable Digital Cordless Answering System with Two Handsets Model No. KX-TG5672 5. 8 GHz Digital Cordless Answering System with Three Handsets Model No. KX-TG5673 Model shown is KX-TG5671. This unit is compatible with Caller ID. [. . . ] *2 KX-TG5672/KX-TG5673 *3 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. *4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *5 The flash time depends on your telephone exchange or host PBX. The setting should stay at "700ms" unless pressing {FLASH} fails to pick up the call waiting call. *6 Generally, the line mode setting should not be adjusted. If "Line in use" is not displayed when another phone connected to the same line is in use, you need to change the line mode to "A". *7 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first. Customer support The handset can display the Internet address where you can download operating instructions or get further information for this product using your computer. {MENU} i "Customer support" i {Select} i {OFF} For assistance, please visit http://www. panasonic. com/phonehelp 35 TG5671_72_73(e). book Page 36 Wednesday, January 11, 2006 7:03 PM Answering System Answering system Important: L Only 1 person can access the answering system at a time. L When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been set (page 18). Screening calls While a caller is leaving a message, you can listen to the call through the base unit's speaker. To adjust the speaker volume, press {^} or {V} repeatedly. You can answer the call by pressing {SPPHONE} on the base unit, or by pressing {C} on the handset. Turning off the call screening feature When the base unit is not in use, press {GREETING CHECK}, then press {V} repeatedly until "0" is displayed. OR While screening, press {V} repeatedly until "0" is displayed. Note: L If you adjust the speaker volume while listening to messages or talking on the intercom, the speaker volume for call screening is turned on again. Memory capacity The total recording capacity (including your greeting message, caller messages, and voice memo) is about 21 minutes. A maximum of 64 messages (including a greeting message) can be recorded. L If the message memory becomes full, the ANSWER ON indicator flashes rapidly (if the answering system is turned on). L If less than 3 minutes of recording time is available, the unit announces the remaining recording time when operating the answering system. [. . . ] For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. For assistance, please visit http://www. panasonic. com/phonehelp 59 TG5671_72_73(e). book Page 60 Wednesday, January 11, 2006 7:03 PM Useful Information IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]