User manual PANASONIC KX-TGA573

[. . . ] TGA573(e). book Page 1 Monday, April 24, 2006 2:05 PM Operating Instructions 5. 8 GHz Expandable Digital Cordless Camera Model No. KX-TGA573 Indoor Use Only This cordless camera is an accessory unit for use with Panasonic base units KX-TG5761/KX-TG5766/KX-TG5767/KX-TG5771/KXTG5776/KX-TG5777. You must register this cordless camera with your base unit before it can be used. Camera monitoring requires a color display handset (KX-TGA571). Please read these Operating Instructions before using the unit and save for future reference. [. . . ] The base unit and monochrome display handsets (KXTGA570) cannot be paged. L If a handset is paged by the cordless camera during a call, 2 tones sound and z flashes on the handset. To monitor the cordless camera from the handset, press {OFF}, then press {s}. L Auto intercom feature cannot be used when paged by a cordless camera. 2 3 4 14 For assistance, please visit http://www. panasonic. com/phonehelp TGA573(e). book Page 15 Monday, April 24, 2006 2:05 PM Camera Monitoring Paging using the cordless camera call button Useful settings while camera monitoring With a color display handset (KXTGA571), you can set the camera settings while monitoring. Important: L Each time you press {OPTION}, the right soft key switches between {BRIGHT}, {ZOOM}, and {SENSOR}. Adjusting the display brightness There are 6 levels. 1 Cordless camera: Press {Call button}. L The cordless camera produces a camera tone and pages the handsets for 1 minute. 1 2 3 2 Start monitoring (page 13). Press {OPTION} repeatedly until {BRIGHT} is displayed. Press {BRIGHT} repeatedly to adjust the brightness. Handset: Press {s} to answer the page. L You can monitor the room where the cordless camera is located. Cordless camera: When the handset user answers, speak clearly into the MIC. Handset: When you finish monitoring, press {OFF} or place the handset on the base unit or charger. Note: L When you finish monitoring, the setting is reset to the default. Selecting image zoom 3 4 1 2 3 Start monitoring (page 13). Press {OPTION} repeatedly until {ZOOM} is displayed. L To return to the original view, press {ZOOM} again. For assistance, please visit http://www. panasonic. com/phonehelp 15 TGA573(e). book Page 16 Monday, April 24, 2006 2:05 PM Camera Monitoring Setting the audio detection sensitivity The cordless camera features a sensor that detects human voices such as a baby cry. Sounds other than human voices may be difficult to detect. To use this feature, confirm that the cordless camera is located in a place where it can easily detect voices. Once the sensor has detected sound, the cordless camera pages the handset. To use the audio detection feature of the cordless camera, turn the audio detection sensitivity to on. The default setting is "off". 1 2 3 4 Start monitoring (page 13). Press {OPTION} repeatedly until {SENSOR} is displayed. {SENSOR} To turn the feature on, push {^}. [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service For assistance in the continental U. S. A. in obtaining repairs please ship the product prepaid to: Panasonic Services Company Customer Servicenter 4900 George McVay Drive Suite B Door #12 McAllen, TX 78503 For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. For Limited Warranty service for headsets if a headset is included with this product please call Panasonic Call Center at 1-800-211-PANA (1-800-211-7262). When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. [. . . ]