User manual PANASONIC KX-TH102C

[. . . ] TH102-C. book Page 1 Monday, March 13, 2006 2:41 PM Operating Instructions Home Communication System Cellular Connection Package Model No. KX-TH102-C This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the handset battery for 4 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] (Default: "On") i {SAVE} i {OFF} Base unit 1 2 3 {MENU} i h i {SET} "Caller ID edit" i {SET} Select the desired setting. (Default: "On") i {SET} i {STOP} 50 For assistance, please visit http://www. panasonic. com/phonehelp TH102-C. book Page 51 Monday, March 13, 2006 2:41 PM Programmable Settings Setting telephone line Y o Line selection The line selection mode determines which line is selected when you press {C} on the handset or {SP-PHONE} on the base unit. ­ "Auto": When making a call, line 1 is selected. If that line is unavailable, line 2 is selected. When answering a call, the ringing line is selected. ­ "Line1": Line 1 is selected. ­ "Line2": Line 2 is selected. Handset Flash time The flash time depends on your telephone exchange or host PBX. L You only need to program this setting once, using either the handset or base unit. Important: L The setting should stay at 700 ms unless pressing {FLASH} fails to pick up the Call Waiting call. Handset 1 2 3 4 5 {MENU} (center of joystick) i h i {SELECT} "Set tel line" i {SELECT} "Set flash time" i {SELECT} Select the desired line. (Default: "700ms") i {SAVE} i {OFF} 1 2 3 4 {MENU} (center of joystick) i h i {SELECT} "Set tel line" i {SELECT} "Line select" i {SELECT} Select the desired setting. (Default: "Auto") i {SAVE} i {OFF} Base unit Note: L You can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}. Base unit 1 2 3 4 {MENU} i h i {SET} "Set tel line" i {SET} "Line select" i {SET} Select the desired setting. (Default: "Auto") i {SET} i {STOP} 1 2 3 4 5 {MENU} i h i {SET} "Set tel line" i {SET} "Set flash time" i {SET} Select the desired line. (Default: "700ms") i {SET} i {STOP} Note: L You can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}. Note for handset and base unit: L If the unit is connected via a PBX, certain PBX functions (call transferring, etc. ) may not work correctly. Consult your PBX supplier for the correct setting. For assistance, please visit http://www. panasonic. com/phonehelp 51 TH102-C. book Page 52 Monday, March 13, 2006 2:41 PM Programmable Settings Line mode Generally, the line mode setting should not be adjusted. When another phone connected to the same line is in use, and ­ if k or l is not displayed on the handset, or ­ if {LINE1} or {LINE2} button light is off on the base unit, you need to change the line mode to "A". L You only need to program this setting once, using either the handset or base unit. Handset Changing the PIN (personal identification number) o For security, the PIN must be entered when changing certain settings such as registering units. The default setting is "7262". Important: L If you change the PIN, please make note of your new PIN. [. . . ] THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. [. . . ]