User manual PANASONIC KX-THA12

[. . . ] THA12_THA17. book Page 1 Tuesday, March 14, 2006 10:05 AM Operating Instructions Home Communication System Cordless Video Camera Handset Model No. KX-THA12 KX-THA17 Home Communication System Cordless Video Camera Handset with A/V Output Model No. This handset is an accessory handset for use with the KX-TH102 base unit. You must register this handset with your base unit before it can be used. Charge the handset battery for 4 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] If you have the cordless camera (KXTHA13), you can answer the page from the cordless camera and monitor the room when: ­ the cordless camera pages the handset when it detects motion and/or sound ­ the cordless camera user pages the handset using the call button. (Refer to the operating instructions of the KX-TH102-M or the KX-THA13 for more information. ) Important: L Before you start monitoring, confirm that the camera lens of the monitored unit has been adjusted to the correct angle. L Only 1 person can access the cordless camera at a time. L KX-THA17 only: By connecting the handset to your TV with the included A/V out cable, you can view camera images using your TV. To connect the handset to your TV with the included A/V out cable, see page 15. Before using this feature, allow access to the destination unit by selecting "Permit" in the monitor access setting (page 38). Adjusting receiver/speaker volume Press {^} or {V} while monitoring. Note: L KX-THA17 only: While viewing images on your TV using the included A/V out cable, you cannot adjust the volume using the handset. Taking a picture of the displayed image while monitoring Press {CAPTURE} when the desired image is displayed. L A title is assigned to the image and the image is saved. Note: L To view the image, see "Picture gallery" on page 41. For assistance, please visit http://www. panasonic. com/phonehelp 39 THA12_THA17. book Page 40 Tuesday, March 14, 2006 10:05 AM H Monitoring Useful display settings while monitoring Selecting image zoom Adjusting the display brightness 1 2 3 4 Start monitoring (page 39). i {MENU} "Brightness" i {SELECT} Press {>} to improve the brightness. Press {<} to decrease the brightness. {SAVE} 1 2 3 Start monitoring (page 39). i {MENU} "Zoom" i {SELECT} Press {ZOOM} to zoom in (1. 5 x zoom) on the image. When viewing at 3 x zoom, you can press {^}, {V}, {<}, or {>} to select the viewable area. L To return to the original view, press {WIDE}. {SAVE} Displaying the image upside down You can turn the camera image upside down. This feature is useful when you mount the cordless camera upside down. 1 2 Start monitoring (page 39). i {MENU} "Upside down" i {SELECT} 4 Note: L When you finish monitoring, the saved image size returns to its original view. Adjusting the display sharpness 1 2 3 Start monitoring (page 39). i {MENU} "Sharpness" i {SELECT} Select the desired sharpness. L If you want to improve the display sharpness, move the cursor to the right (the smoothness of motion decreases). [. . . ] (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer. The items listed are not exclusive, but are for illustration only. ) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. [. . . ]