User manual PANASONIC KX-TS401

[. . . ] - the direct call feature is turned on (only phone number stored in the unit as the direct call number can be called). ⷠDo not open the charger or handset other than to replace the battery(ies). This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers. [. . . ] Do not subject this product to excessive smoke, dust, mechanical vibration or shock. ⷠThis product should be kept away from heat sources such as radiators, cookers, etc. It should also not be placed in rooms where the temperature is less than 5 °C or greater than 40 °C. Ensure that the AC outlet is installed near the unit and is easily accessible. warning: · To prevent the risk of electrical shock, do not expose this product to rain or any other type of moisture. ⷠUnplug this unit from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised service centre. If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. (It is normal for the adaptor to feel warm during use. For maximum distance and noise-free operation, place your base unit: - away from electrical appliances such as TVs, radios, personal computers or other phones. Place the handset on the charger for about 7 hours before initial use. " when the handset is placed on the charger if it is not registered to a base unit. If it is not on, press and hold {ih} for few seconds to turn the handset on. [. . . ] 2 Press and hold {x} on the base unit for about 3 seconds, until the With the handset still on the base unit, wait until a confirmation tone sounds and w stops flashing. If all registered handsets start ringing in step 2, press {x} to stop. Charge the batteries for about 7 hours before initial use. [. . . ]