User manual PANASONIC KX-B420

[. . . ] D This product is designed for installation by a qualified servicing dealer. Installation performed by non-authorized individuals could cause safety-related problems with the operation of this equipment. D To locate the closest authorized dealer in your area, please call 1-800-449-8988. ? 2 Things you should keep a record of For optimum performance and safety, please read these instructions carefully. Thank you for purchasing the Panasonic Electronic Print Board. CMicrosoft®, Windows®, Windows NT® and NetMeeting® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] These drawing and erasing operations are recorded automatically. (1) Start the Interactive Panaboard Software and select the Whiteboard mode. (See page 29. ) CThe Whiteboard window is displayed. (2) Remove the cap of the Electronic Pen and draw on the Interactive Panaboard screen using the Electronic Pen. CThe position on the screen where you are drawing will be reproduced on the page in the Whiteboard window in realtime. Using (3) Erase handwritten lines drawn on the Interactive Panaboard screen using the Electronic Eraser. CPortions erased on the screen will also be erased on the page in the Whiteboard window. Note CThe right figure shows the writing area in the Whiteboard mode. Position Do not write the shaded area on the right figure. Receiver CDo not cover the position receiver with your hand as this may cause interactive function to stop functioning. 100mm CPress down firmly with the point of the Electronic Pen or the eraser 50mm (2") (315/16") on the screen film until you hear a buzzing sound. CDo not do the followings near the Interactive Panaboard while using the Whiteboard mode as this may display unnecessary streaks not 35mm 35mm Writing area written in the Whiteboard window. (13/8") (13/8") - Exchanging markers for interactive (Small) of the Electronic Pen - Setting or removing a marker cap of the Electronic Pen 25mm (1") - Pushing the point of the Electronic Pen CWhen exchanging markers for interactive (Small) of the Electronic Pen, lock the pen holder lever while inserting the marker all the way into the pen holder until you hear a buzzing sound. Detection of the marker color may not work well unless the marker is inserted fully into the pen holder. Remark: CWhen advancing the screen of the Interactive Panaboard, click [Add New Page] in the [Edit] menu to add a new page. 43 Whiteboard Mode CSave drawing data in a file All drawing and erasing operations of the Interactive Panaboard which are reproduced on a page in the Whiteboard window are automatically recorded. And if the data is saved in the Interactive Panaboard format file (extension ". ipb", referred to as IPB documents), the details of meetings and discussions written in the Panaboard can be played back and edited later. (1) Click [Save As. . . ] in the [File] menu. CThe Save As dialog box will appear. (2) Enter the folder where you want to save the file and the file name. CThe extension of the file is ". ipb". (3) Click the [Save] button. COpen the saved data The saved data can be displayed in the Whiteboard window as well as browsed, played back and edited. (1) Click [Open. . . ] in the [File] menu. CThe Open dialog box will appear. (2) Enter the folder to look in and the file name you want to open. CThe file has an ". ipb" extension. (3) Click the [Open] button. Remark: CMany different operations can be executed in the displayed IPB document. ) Image size: Indicate the page size when it is 100% display ratio. * Page number: Indicate the total number of pages and the page being displayed. For more details about the Whiteboard window, refer to "View Window or Whiteboard Window Operation" from page 46. 45 View Window or Whiteboard Window Operation s Differences between the View window and the Whiteboard window The View window of the Projector mode and the Whiteboard window of the Whiteboard mode are windows which function to display and edit IPB documents in which the contents of work performed on the Interactive Panaboard are recorded. Basically, they both have identical functions. However, the Whiteboard window has some functions the View window does not have. If you understand the differences between the two windows as follows, you will be able to quickly use both windows just by learning the operations of one window. Difference Details CThe View window displays IPB documents which record work done in the computer screen that is projected onto the Interactive Panaboard screen by the projector. Consequently, the size is represented by dots. System of units CIn the Whiteboard window the state of the Interactive Panaboard screen where the marker was used to draw is virtually displayed in a computer window. Consequently, units of length are standard. You can choose between units in millimeters or inches. CThe View window function displays and edits IPB documents created by the Desktop Drawing Tool. Consequently, the [New] menu does not exist. [. . . ] CBefore assembly, be sure to lock the casters. Locking the casters (Push this side) Releasing the lock 78 Assembling the Optional Stand (KX-BP065) s Assembly 1 Assembling the stand Assembling the fall-prevention extension legs. The fall-prevention extension legs increases the safety of the electronic print board. Insert the covers to the pipes . 11 3 1 12 13 2 Fall-prevention extension legs CCaster locks are attached to the back side. Assemble with the holes toward the front. 4 6 V1 A 4 2 5 3 10 2 V1 6 CTo lock the fall-prevention extension legs, lift portion A. Installation Locking casters side. (rear) 3 10 Locking casters side. (rear) 6 1 Do not tighten the screw too much. This may deform the pipes. 79 Assembling the Optional Stand (KX-BP065) 2 Attach the attachment fixtures 8 with the four wing-bolts. [. . . ]