User manual PANASONIC KX-B530

[. . . ] -- 1 pc. 2 Operating Instructions Trademarks Netscape and Netscape Navigator are either registered trademarks or trademarks of Netscape Communications Corporation in the U. S. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries. Microsoft, Windows, Windows NT, MS-DOS, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Do not copy the text. [For assistance, please call: 1-800-272-7033] 57 Operating Instructions 3. 5. 5 Security: General User Security: General User window allows the administrator to create the general user ID and password for the security level defined as general user. Up to 30 individual user names can be defined. The various security levels are explained on page 57. 1. Click [Security: General User] on Setup Page. 2. Enter each parameter in the proper data field. Click [Cancel] to leave the current settings unchanged. The window returns to Setup Page without saving the parameters. Restart to make Security: General User window settings effective to all Motion JPEG viewers. 58 Operating Instructions Instructions for the data fields General User Authentication (1) User ID List The General User can be up to 30. Each of them can have their own ID and password. User ID List displays the registered user name. [Delete] and [Modify] deletes/modifies the general user in the list. Select the desired user and click [Delete] or [Modify]. (2) New User Enter the general user ID, password and reenter the password to confirm. The password should be difficult to guess and confidential. 10 seconds to Unlimited On the Air time Specifies the timetable to allow users to access Top View Image screen. When you access the image except the specified time, blue screen appears. Always: Always allows users to access. Operational between: Specifies the date and time to access the image. [For assistance, please call: 1-800-272-7033] 61 Operating Instructions 3. 5. 7 Image Transfer Image Transfer window can set the Image Transfer feature. Network Camera can buffer images and send the images via e-mail or FTP. The request to send the image is initiated by a contact closure from the external sensors/devices connected to the External I/O using the Alarm mode. The external sensors/ devices are customer provided. The images can also be sent in the interval of time using the Timer mode. Make sure Date and Time has been configured. Note When you use FTP or e-mail in transferring the image, you need to set Default Gateway and DNS Server address. Non Transfer : Image Transfer feature is not in use. Alarm mode Timer mode : The alarm trigger activates transferring the image. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Environment: Do not install Network Camera where the temperature is less than +5 C (+41 F) or greater than +40 C (+104 F). [. . . ]