User manual PANASONIC KX-B630

[. . . ] R Cordless handset (KX-B630 optional): The display will be in the selected language. If you want to change the setting, see feature #110 on page 103. Caution: R Do not rub or use an eraser on the printed side of the recording paper, as the print may smear. Notice for product disposal, transfer, or return: R This product can store your private/confidential information. [. . . ] R When callers leave messages, the unit records the day and time of each message. Make sure the date and time have been set correctly (page 28). A MCN MCNMDNMFNMEN MOFFN *1 If pressed within the first 5 seconds of a message, the previous message is played. *2 To resume operation, press a command key within 10 seconds. *3 Unit resets to a pre-recorded greeting message. Recording a marker message After playing back the messages, you can leave an additional message. Wait for 3 beeps indicating the end of the remote operation. Hear the voice guide and/or hear 1 beep. Call your unit and let it ring 10 rings. Enter the remote operation ID (feature #306 on page 76, 88) within 10 seconds. R The receiving mode will be set to TAM/FAX or FAX ONLY mode, depending on the setting of feature #400 (page 81). Hang up the handset. 10. 10. 1 Recording your greeting message 1 MMENUN (soft key A) A M#NM3NM0NM2N 2 "Yes" A MSELECTN (soft key A) 3 After a beep sounds, hold the cordless handset about 20 cm (8 inches) away and speak clearly into the microphone (60 seconds max. ). *2 To resume playback: "Playback" A MSELECTN (soft key A) *3 You can also erase as follows: MERASEN (soft key A) A "Yes" A MSELECTN (soft key A) 75 10. Answering Machine 10. 10. 6 Programming for answering machine To set the remote operation ID A 3-digit remote access code must be entered when operating the answering machine remotely. This code prevents unauthorized parties from listening to your messages remotely. Important: R To prevent unauthorized access to this product, we recommend that you regularly change the remote code. Enter the desired 3-digit remote access code. MSAVEN (soft key A) A MOFFN To deactivate remote operation Press MGN in step 2 on "To set the remote operation ID", page 76. R The entered remote access code is deleted. Note: R You can also program this feature with the base unit (feature #306 on page 88). To change the ring count in TAM/FAX mode You can change the number of times the unit rings "Ring count" before the unit answers a call. You can select 2 to 4 rings, or "Toll saver". The default setting is "2 rings". [. . . ] The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl. org. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www. openssl. org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. [. . . ]