User manual PANASONIC KX-BP095

[. . . ] -- 3 pcs. 2 Operating Instructions Trademarks Netscape and Netscape Navigator are either registered trademarks or trademarks of Netscape Communications Corporation in the U. S. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries. Microsoft, Windows, Windows NT, MS-DOS, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Refer to unavailable character set 1 on page 108. Note Assign the ID and password to meet your specific security requirements. To maximize its effectiveness, keep the following contents. Be sure the ID and password are different. Make the ID and password as long and random as possible. Periodically change the password. [For assistance, please call: 1-800-272-7033] 67 Operating Instructions 3. 5. 6 Top View Image Top View Image Setting window can change settings for Top Page, Single Camera and Multi-Camera screen such as the initial language, the image resolution, image quality, refresh interval as the initial setting, Limit time of Continuous Motion JPEG and On the Air time. 1. Click [Top View Image] on Setup Page. 2. Select the each parameter. Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters. Restart to make Limit Time of Continuous Motion JPEG settings effective to all Motion JPEG viewers. Instructions for the data fields Language Select the initial language from the list: English (US), English (UK), French, German, Italian, Spanish or Japanese. The selected language is displayed as the initial language on Top Page, Single Camera screen and Multi-Camera screen. Refer to page 78. Note The Alarm and Timer mode cannot be set at the same time. 70 Operating Instructions Non Transfer mode Non Transfer mode enables [Start Capture] on the operation bar to buffer the image on the Single Camera screen. Capture Control can lock [Start Capture] on the operation bar to prevent the user from capturing the Buffered Image. Click [Clear Buffered images] to clear the buffered image. [Clear Buffered images] does not save the parameters. 1. Click [Image Transfer] on Setup Page. 2. Select the each parameter. Click [Cancel] to quit the current settings. The window returns to Setup Page without saving the parameters. [For assistance, please call: 1-800-272-7033] 71 Operating Instructions Transfer in the Alarm Mode The Alarm mode can transfer an image via e-mail or FTP when the alarm trigger is active. To activate the alarm trigger, the External Sensor Input of External I/O must be connected with the external sensors/devices. The Alarm mode can send the e-mail without transferring the image. The Alarm mode uses the Network Camera internal clock. Make sure Date and Time has been configured. Refer to page 62 about Date and Time. 1. Click [Alarm] on Image Transfer window. a. [. . . ] Encryption (WEP) Short for Wired Equivalent Privacy. WEP is a security protocol for wireless network defined in the IEEE 802. 11b standard. WEP aims to provide security by encrypting data over radio waves so that it is protected as it is transmitted from one end point to another. IEEE 802. 11b IEEE 802. 11b refers to the specifications developed by the IEEE for wireless network technology. [. . . ]