User manual PANASONIC KX-BP635

[. . . ] · Operating Instructions (Included on the Setup CD-ROM) Operating Instructions explains about operations, settings, features and the cleaning method when using the camera. Abbreviations · · · · UPnP is the abbreviation for "Universal Plug and Play". "Network Camera" is called "Camera" in this Installation/Troubleshooting. Adobe, Acrobat and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Microsoft, Windows and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Click [Single] tab on the above. · · Capture Image Button (see page 20 of the Operating Instructions) Operation Bar (see page 21 of the Operating Instructions) Refresh Interval (see page 21 of the Operating Instructions) Network Camera Pan / Tilt Scan Zoom Focus Camera Image Preset Program Alarm Brightness STD Output Please click here when gray color screen displayed + Running in IPv4 mode. Open Short Refresh Interval Motion Resolution 640X480 320X240 Image Quality Favor Clarity Standard Favor Motion The banner is displayed. (see page 18 of the Operating Instructions) Note For IPv6 connection, see page 13 of the Operating Instructions on the Setup CD-ROM. 6. Close the web browser. [For assistance, please call: 1-800-272-7033] 31 Installation/Troubleshooting Security Warning window To view a video (Motion JPEG), ActiveX® Controls must be installed. When trying to display a video for the first time, Security Warning window will be displayed. When using Windows 2000 or Windows XP, log in as an administrator to install it. If you cannot install ActiveX Controls or you cannot see the video in the Internet Explorer Click [Tools] [Internet Options] [Security] tab and click [Custom level] on the web browser. (1) Check "Prompt" in "Download signed ActiveX Controls". (2) Check "Enable" in "Run ActiveX Controls and plug-ins". · ActiveX Controls can be installed from the file on the Setup CD-ROM. (2) Confirm that Internet Explorer is closed. (3) Double-click"ocx\ActiveXInst. exe" on the Setup CD-ROM. Note · Video may not be displayed quickly. Make sure the camera is firmly mounted on a beam of wood etc. When there is no beam, apply a board on the other side of the ceiling to make sure the camera does not drop. Keep more than 100 mm (4 inches) off the wall or other obstacles. Camera direction 100 mm (4 inches) Screws B (4 pcs. ) [For assistance, please call: 1-800-272-7033] 35 Installation/Troubleshooting 2. Make a hole for a cable. Hole for a cable: 25 mm (1 inch) 65 mm (2. 5 inches) 3. Fix the rubbers and dents on the camera to the Ceiling Plate A and fix them firmly · Tighten the plate using a coin or similar object until the camera is secure. Fit the four rubbers in place. Fit the two dents in place. 4. Fix the Ceiling Plate A to the Ceiling Plate B and fix them firmly with Screws A. Four Tabs Fit the hooks to the holes and move in the counterclockwise direction. Screws A (2 pcs. ) Fix firmly with Screws A. 36 Installation/Troubleshooting Note Install the camera so that the connecting part comes to the front. 5. Connect all necessary cables (AC adaptor cord, Ethernet cable, video cable, etc. ) and fix the Ceiling Mounting Cover. Adjust the "l" of the main unit to the "l" of the Ceiling Mounting Cover. · Be careful not to nip the cable etc. 6. Move the Ceiling Mounting Cover in the clockwise direction until the "·" of it fits to the "l" of the main unit. · When removing the Ceiling Mounting Cover, move it in the counterclockwise direction. [. . . ] Cancel the E-mail server or FTP server's IPsec settings, and communicate using tunnel mode. · Either server's SA or camera's SA is not established. Restart the camera. 54 Installation/Troubleshooting 2. 8 Miscellaneous Cause and Remedy · Security software disables the ActiveX installation. Close the security software, and install the ActiveX again. [. . . ]