User manual PANASONIC KX-F1810E

[. . . ] Use discretion when disposing of the used ink film. L Do not rub or use an eraser on the printed side of recording paper, as the print may smear. Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. [. . . ] Copy Copying 5 Copy 5. 1 Making a copy 1 L If the document exceeds the memory capacity, copying of the exceeded document will be cancelled and this feature will be turned OFF automatically. To stop copying Press {STOP}. 5. 1. 1 More copying features To enlarge a document 1. Press {A} repeatedly to select "150%" or "200%". i {START} L The unit will enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. Example: 150% enlarged copy {A}{B}{>} {COPY} {START} {STOP} Original document AB CD Enlarged copy AB CD 1 Adjust the width of the document guides (1) to fit the actual size of the document. 2 Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document. 3 If necessary, press {A} or {B} repeatedly to select the desired resolution. L If you select "STANDARD", copying will be performed using "FINE" mode. To reduce a document 1. Press {B} repeatedly to select "92%", "86%" or "72%", then press {START}. Setting "100%" (default) "92%" "86%" "72%" Recording paper size A4 A4 A4 A4 Original document size A4, Letter A4 A4 Legal 4 {COPY} L If necessary, enter the number of copies (up to 20). 5 Press {START}, or the unit will start copying within 15 seconds. Note: L Any document which can be sent as a fax can also be copied (page 32). To select the resolution Select the desired resolution according to the character size. L If you change the maximum recording time of incoming messages to "GREETING ONLY" (page 44, feature #10 on page 47), the unit will answer a call with your current greeting message, and then hang up. Re-record your greeting message to inform 41 6. Answering Machine Incoming Messages 6. 2 Listening to recorded messages When the unit has recorded new voice messages: ­ The {AUTO ANSWER} indicator will flash when auto answer is turned ON. ­ The total number of recorded messages will flash on the base unit display. If you subscribe to Caller ID service During playback, you can call back the displayed name or number using the base unit. L If you do not need to edit the telephone number, skip to step 3. Lift the handset or press {SP-PHONE}. 6. 2. 1 To play back messages 6. 2. 3 Erasing recorded messages To erase a specific message AUTO ANSWER Press {ERASE} while listening to the message you want to erase. Within 5 seconds, press {ERASE}. Memo Message 6. 3 Leaving a message for others or yourself {MENU} {<}{>} {ERASE} {SP-PHONE} You can record a voice memo to leave a private message for yourself or someone else. Recorded messages are treated as new messages. 1 {MEMO} L A long beep will sound. {PLAYBACK} Press {PLAYBACK}. L After playing back all of the new messages, the {AUTO ANSWER} indicator will stop flashing but will remain lit up when auto answer is turned ON. If you press {PLAYBACK} at this time, all the recorded messages will be played. 2 Speak clearly about 20 cm away from {MIC}. 3 To stop recording, press {STOP}. Note: L If you record for over 3 minutes, the unit will stop recording. 6. 2. 2 Useful features during playback To repeat a message Press {<} while listening to the message. [. . . ] *2 Transmission speed is based upon the ITU-T No. If the capability of the other party's machine is inferior to your unit, the transmission time may be longer. *3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will be retained in memory. *4 Recording time may be reduced by the calling party's background noise. [. . . ]