User manual PANASONIC KX-F2090BE

[. . . ] Table of Contents Accessories 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 Included accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Accessory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recording paper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] L The remaining time for recording incoming messages will be displayed. {FAX/START} How phone calls and faxes are received 1. "INCOMING CALL" will be displayed but the unit will not ring. The unit will wait for the duration of 2 rings before answering the call. L The number of rings is determined by the "TEL/FAX delayed ring setting" (feature #78 on page 35). L During this time, an extension telephone (if connected to the same line) will ring. The unit will answer the call and try to detect a fax calling tone. When a fax calling tone is detected The unit receives the fax automatically without ringing. When a fax calling tone is not detected A The unit will ring. L Callers will hear a ring back tone different from the one generated by the telephone company. L An extension telephone (if connected to the same line) will not ring at this time. Note: L The maximum recording time for incoming message can be changed (feature #10 on page 33). Using one-touch dial: For stations 1­5 Press the desired station key. For stations 6­10 Press {LOWER}, then press the desired station key. Using phonebook: Press {A} or {B} repeatedly to display the desired item. 5. 7. 2 Activating FAX ONLY mode 1 Make sure feature #77 is set to "FAX ONLY" beforehand (page 35) (KX-FT938 only). 2 Press {AUTO ANSWER} repeatedly to display the following. FAX ONLY MODE L The {AUTO ANSWER} indicator turns ON. 4 Press {FAX/START}. L The unit will start fax reception. 26 6. Copy Copying 6 Copy 6. 1 Making a copy 2 {STOP} 1 {COPY} {A}{B} 1 Open the document feeder tray (1), then adjust the width of the document guides (2) to fit the actual size of the document. 2 Insert the document (up to 10 pages) FACE DOWN until a single beep is heard and the unit grasps the document. L If the document guides are not adjusted to fit the document, re-adjust them. 3 If necessary, press {A} or {B} repeatedly to select the desired resolution. 4 Press {COPY}. L The unit will start copying. Note: L When you copy a multiple-page document which is longer than A4 size paper (approx. 300 mm), we recommend you insert one page at a time. L Any document which can be sent as a fax can also be copied (page 20). L The copied recording paper comes out somewhat longer than the document size. To select the resolution Select the desired resolution according to the type of document. [. . . ] 600 mm in length Effective scanning width: 208 mm Recording paper size: 216 mm × max. 30 m roll Effective printing width: 208 mm Transmission time*1: Approx. 15 s/page (Original mode)*2 Scanning density: Horizontal: 8 pels/mm Vertical: 3. 85 lines/mm ­ in standard resolution, 7. 7 lines/mm ­ in fine/photo resolution, 15. 4 lines/mm ­ in super fine resolution Photo resolution: 64-level Scanner type: Contact Image Sensor Printer type: Thermal printing Data compression system: Modified Huffman (MH), Modified READ (MR) Modem speed: 9, 600 / 7, 200 / 4, 800 / 2, 400 bps; Automatic Fallback Operating environment: 5 °C ­ 35 °C, 20 % ­ 80 % RH (Relative Humidity) Dimensions: Approx. height 121 mm × width 352 mm × depth 224 mm Mass (Weight): KX-FT932: Approx. [. . . ]