User manual PANASONIC KX-F2900

[. . . ] 5 Press a memory station number ((0) to (9)). 6 When finished, hang up. · To store other number, repeat steps 1 to 6. · If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (5-C). 1 2 When the unit rings, lift the handset. When finished talking, hang up. · The (REDIAL) button does not work for Speed Dialer. [. . . ] Pressing (PAUSE) counts as one digit (5-C). 1 2 When the unit rings, lift the handset. When finished talking, hang up. · The (REDIAL) button does not work for Speed Dialer. To dial the number again, hang up and repeat steps 1 to 3. · If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased. Store phone numbers again. PQQX13390ZA AG0302AS0 For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262) 4 One-Touch Dialer 4-A Storing Phone Numbers in Memory You can store a number in each auto dial button ((DIRECT) or (EMERGENCY)). Do not press any one-touch auto dial buttons before storing to prevent misoperation. It is recommended that you program an emergency number in the (EMERGENCY) button. 5 6 When finished, hang up. · To store other number repeat step 1 to 6. · If a pause is required for dialing, press (PAUSE) where needed. Pressing (PAUSE) counts as one digit (5-C). Special Features 5-C How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend that you press (PAUSE) if a pause is required for dialing with a PBX or to access a long distance service. Line access number (9) (PBX) (9) (PAUSE) Phone number 5-A For Call Waiting Service Users To erase a stored number Lift the handset press (PROGRAM) (PAUSE) (PROGRAM) one-touch auto dial buttons ((DIRECT) or (EMERGENCY)). Press (FLASH) if you hear a call-waiting tone while talking. · The first call is put on hold and you can answer the second call. · Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customer in the USA or Puerto Rico ONLY · If there is any trouble _ disconnect the unit from the telephone line and connect a known working phone. If the known working phone does not operate properly, consult your telephone company. For product service · Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an authorized servicenter. · Panasonic's e-mail address for customer inquiries: consumerproducts@panasonic. com for customers in the USA or Puerto Rico ONLY. When you ship the product · Carefully pack your unit, preferably in the original carton. · Attach a letter, detailing the symptom, to the outside of the carton. Symptom 7 1 Referencia Rápida 4 5 Coloque el selector del timbre (RINGER) a HIGH (alto), LOW (bajo) u OFF (apagado). · Cuando esté colocado en OFF, la unidad no sonará. 6-A Troubleshooting The unit does not work. The call cannot be connected even when you dialed correctly. You cannot store a phone number in memory. 7-A Pasos Iniciales Conecte el cordón del auricular. A la toma de teléfono de una sola línea Cordón de línea telefónica Selector del modo de discado (DIALING MODE) Selector del volumen en el auricular (HANDSET VOLUME) Auricular Selector del timbre (RINGER) Coloque el selector de volumen del auricular en HIGH (alto), MEDIUM (medio) o LOW (bajo). 7-B Realizando Llamadas 6-B Helpful Information · Environment _ do not place the unit in room where the temperature is less than 5oC (41oF) or greater than 40oC (104oF). Allow 10 cm (4") clearance around the unit for proper ventilation. [. . . ] The call cannot be connected even when you dialed correctly. You cannot store a phone number in memory. 7-A Pasos Iniciales Conecte el cordón del auricular. A la toma de teléfono de una sola línea Cordón de línea telefónica Selector del modo de discado (DIALING MODE) Selector del volumen en el auricular (HANDSET VOLUME) Auricular Selector del timbre (RINGER) Coloque el selector de volumen del auricular en HIGH (alto), MEDIUM (medio) o LOW (bajo). 7-B Realizando Llamadas 6-B Helpful Information · Environment _ do not place the unit in room where the temperature is less than 5oC (41oF) or greater than 40oC (104oF). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock or direct sunlight. [. . . ]