User manual PANASONIC KX-F3550BE

[. . . ] Caution: L Do not rub or use an eraser on the printed side of recording paper, as the print may smear. Notice for product disposal, transfer, or return L This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the information such as phonebook or caller information from the memory before you dispose, transfer or return the product. L Note that the images of copied or received documents will remain on the used ink film. [. . . ] The caller presses {*}{#}{9} (pre-selected fax activation code). L The unit will activate the fax function. The caller presses the start button to send a document. Note: L To use this feature, make sure remote fax activation is turned ON (Feature #41 on page 32). The fax activation code can also be changed. L If there is no room left in memory of your answering machine, the unit may not be able to receive documents. See the operating instructions of the answering machine and erase unnecessary messages. 4. 10. 1 Activating the junk fax prohibitor 1 Press {MENU} repeatedly to display "JUNK FAX PROH. " i {>} 2 Press {A} or {B} repeatedly to select "ON". 4. 10. 2 Storing undesired callers You can register up to 10 undesired numbers from the Caller ID list (page 17) if you do not wish to receive faxes from them. 1 Press {MENU} repeatedly to display "JUNK FAX PROH. ". 2 Press {>} repeatedly to display "JUNK LIST SET". i {SET} 3 Press {A} or {B} repeatedly to display the item you wish to prevent the fax reception from. i {SET} 4 Press {STOP} to exit. To display the junk fax prohibitor list 1. Press {MENU} repeatedly to display "JUNK FAX PROH. ". Press {>} repeatedly to display "JUNK LIST DISP. ". To select the resolution Select the desired resolution according to the character size. ­ "FINE": For small-sized characters. ­ "SUPER FINE": For very small-sized characters. ­ "PHOTO": For photographs, shaded drawings, etc. Copying from memory (Quick scan feature) This feature is helpful when you want to copy the document, then remove it for other uses. To use this feature, activate feature #34 (page 32) beforehand. L If the document exceeds the memory capacity, copying of the exceeded document will be cancelled and this feature will be turned OFF automatically. Note: L If the image at the bottom of the document is not copied when you copy a document that is the same length as the recording paper, try 92 % or 86 %. To collate multiple copies The unit can temporarily collate multiple copies in the same order as the original document pages. Press {>} 2 times to display "COLLATE OFF". Press {A} or {B} repeatedly to display "COLLATE ON". Copy Example: Making 2 copies of a 4-page original document 4 3 2 1 2 4 3 2 1 Collated pages 1 1 2 3 3 4 4 Uncollated pages Note: L The unit will store the documents into memory while collating the copies. [. . . ] 600 mm in length Effective scanning width: 208 mm Effective printing width: 202 mm Transmission speed*1: Approx. 12 s/page (ECM-MMR)*2 Scanning density: Horizontal: 8 pels/mm Vertical: 3. 85 lines/mm (standard resolution) 7. 7 lines/mm (fine/photo resolution) 15. 4 lines/mm (super fine resolution) Photo resolution: 64 levels Scanner type: Contact Image Sensor {MENU} {SET} {STOP} {<}{>} 1 Press {MENU} repeatedly to display "PRINT REPORT". Printer type: Thermal Transfer on plain paper Data compression system: Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR) Modem speed: 9, 600 / 7, 200 / 4, 800 / 2, 400 bps; Automatic Fallback Operating environment: 5 °C ­ 35 °C, 20 % ­ 80 % RH (Relative Humidity) Dimensions: Approx. height 185 mm × width 355 mm × depth 272 mm Mass (Weight): Approx. 3. 5 kg Power consumption: Standby: Approx. [. . . ]