User manual PANASONIC KX-FC195GRG

[. . . ] L Most figures shown in these operating instructions are based on a KX-FLB813. Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Trademarks: L Microsoft, Windows and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Copy 7. 3. 2 To reduce a document 7. 3 More copying features L Keep the front cover page open for button locations. L Make sure that the {COPY} light is ON. 1 2 3 4 5 Set the original. Press {V} repeatedly to select from "95%" to "50%" by changing the reduction rate 5% at a time. After you finish copying, press {STOP} to reset this feature. 7. 3. 1 To enlarge a document 1 2 3 4 5 Set the original. Press {^} repeatedly to select from "105%" to "200%" by changing the enlargement rate 5% at a time. After you finish copying, press {STOP} to reset this feature. Example: 70% reduced copy Using the auto document feeder: Original document Reduced copy L When using the auto document feeder, the unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. L When using the scanner glass, the unit will only enlarge the right top corner of the document starting from the l mark on the unit. Example: 150% enlarged copy Using the auto document feeder: Original document Enlarged copy Using the scanner glass (1): Original document Reduced copy 1 7. 3. 3 To collate multiple copies (Auto document feeder only) The unit can collate multiple copies in the same order as the original document pages. Using the scanner glass (1): Original document Enlarged copy 1 1 2 3 4 5 6 Set the original. Press {V} or {^} repeatedly to display "ON". If the unit is connected to a computer before installing Multi-Function Station, the [Found New Hardware Wizard] dialogue box will appear. Insert the included CD-ROM into your CDROM drive. L The [Choose Setup Language] dialogue box will appear. Select the desired language that you want to use with this software from the drop-down list. The installation will automatically start. L If the [Choose Setup Language] dialogue box does not appear: The installation will automatically start. L If the installation does not start automatically: Click [Start]. Type "D:\setup" (where "D:" is the drive letter of your CD-ROM drive). (If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive. ) 6 7 2 Important notice for Windows XP users L If you use Windows XP, the following message may appear after step 6: "The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP" This is normal and the software will not cause any difficulties with your operating system. You can continue the installation with no problem. Note: L If the screen prompts to insert the CD-ROM for operating system when installing MultiFunction Station, insert it into your CD-ROM drive. To use the other unit with the computer You need to add the printer driver for each unit, as follows. [. . . ] L The pictures and illustrations in these instructions may vary slightly from the actual product. 93 11. General Information Recording paper specifications Recording paper size: A4: 210 mm × 297 mm Letter: 216 mm × 279 mm Legal: 216 mm × 356 mm Envelope size: #10: 105 mm × 241 mm DL: 110 mm × 220 mm Recording paper weight: 60 g/m2 to 90 g/m2 Note for recording paper: L We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities. L Do not use the following types of paper: ­ Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes ­ Extremely smooth or shiny paper, or paper that is highly textured ­ Coated, damaged or wrinkled paper ­ Paper with foreign objects attached, such as tabs or staples ­ Paper which has dust, lint or oil stains ­ Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 °C, such as vellum paper. These materials may transfer onto the fusing roller and cause damage. [. . . ]