User manual PANASONIC KX-FC243FX

[. . . ] Compact Plain Paper Fax with DECT Operating Instructions Model No. KX-FC243FX Please read these operating instructions before using the unit and save for future reference. To use these features, you must subscribe to the appropriate service of your service provider. Location of Controls How to use the operating instructions When following operating instructions, always keep the front cover page (next page) open for easy reference to the buttons. OPEN i Location of Controls Please keep this page open when following operating instructions. For a description of each button, see page 10, 11. Base unit A B C DE FG H LOCATOR/INTERCOM LOCA OR/INTERCOM MIC DIGITAL SP-PHONE I JK L M N OP QR Buttons (Listed in alphabetical order) AUTO ANSWER F LOCATOR/INTERCOM B CALLER ID A MENU N COPY I MIC (Microphone) G DIGITAL SP-PHONE O MUTE R ERASE D NAVIGATOR M FAX/START J PAUSE Q GREETING C PLAYBACK E HELP L RP REDIAL Q SET J START J STOP K TONE H VOLUME M Cordless handset Buttons Left soft key A C (Talk) B Joystick C s (Speakerphone) D R (Recall) E Right soft key F ih (Off/Power) G C (Clear) H INT (Intercom) I Microphone J A B C D E 1 4 7 2 5 8 0 3 6 F G H 9 I J ii Dear purchaser, Thank you for purchasing a Panasonic fax machine. You have acquired a product made in compliance with the Digital Enhanced Cordless Telecommunications (DECT) standard. [. . . ] Press * (centre of joystick) during playback. Select "Call Back", then press , . L The cordless handset stops playback and automatically dials the telephone number. L If you need to edit the telephone number to return the call, select "Edit for Call" in step 2, then press , . Edit the number (page 37), then press , to call back. To change the ring setting in TAM/FAX mode To change the number of rings before the unit answers a call in TAM/FAX mode. You can select "Auto", "2 Rings" (default), "3 Rings", "4 Rings", "5 Rings", "6 Rings" or "7 Rings". Select "Setting TAM", then press , . Select "Number of Rings", then press , . Select the desired setting, then press , . Note: L You can also program this feature with the base unit (feature #06 on page 64). To change the maximum recording time for incoming messages "1 Minute": Up to 1 minute. "No Limit" (default): Unlimited within the voice memory capacity (page 105). "Greeting Only": The unit plays the greeting message but does not record caller messages. Select "Setting TAM", then press , . Select "Msg Rec Time", then press , . Select the desired setting, then press , . Note: L You can also program this feature with the base unit (feature #10 on page 64). To set the greeting message monitor To select whether the greeting message is heard through the unit's speaker when the unit answers a call. Select "Setting TAM", then press , . Select "Greet Monitor", then press , . Select "On" or "Off", then press , . Press {ih}. 8. 4. 5 Programming for answering machine To set the remote operation ID A 3-digit remote operation ID must be entered when operating the answering system remotely (page 61). [. . . ] *3 If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will be retained in memory. *4 Recording time may be reduced by the calling party's background noise. 1 Test Chart Recording paper specifications Recording paper size: A4: 210 mm × 297 mm Recording paper weight: 64 g/m2 to 80 g/m2 Note for recording paper: L Do not use the following types of paper: ­ Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes ­ Extremely smooth or shiny paper, or paper that is highly textured ­ Coated, damaged or wrinkled paper ­ Paper with foreign objects attached, such as tabs or staples ­ Paper which has dust, lint or oil stains 105 13. General Information ­ Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 °C, such as vellum paper. [. . . ]