User manual PANASONIC KX-FLB751

[. . . ] Flat-Bed Multi-Function Laser Fax Operating Instructions Model No. KX-FLB751 FOR FAX ADVANTAGE ASSISTANCE: ­ CALL 1-800-HELP-FAX (1-800-435-7329) ­ E-MAIL TO consumerproducts@panasonic. com for customers in the U. S. A. or Puerto Rico ­ REFER TO www. panasonic. com for customers in the U. S. A. or Puerto Rico Please read these Operating Instructions before using the unit and save for future reference. This model is designed to be used only in the U. S. A. Thank you for purchasing a Panasonic facsimile. Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Dealer's name and address Dealer's telephone number Serial number (found on the rear of the unit) Caution: The Telephone Protection Act of 1991 requires the following information to be clearly stated either at the top or bottom margin of the first message page when transmitting messages via telephone facsimile: -- date and time of transmission, -- identification of the business, entity or person(s) sending the facsimile, and -- telephone number of the business, entity or person(s). [. . . ] If memory becomes full while storing, the unit will only print out the stored pages. q After copying, the collating feature will turn off automatically. q The 1. Example: PAGES=01 FINE 01% Display: 3. q To copy more pages, repeat steps 3 and 4. Press d. 46 Setup (PC) Connecting to a computer! Panasonic Multi-Function Station software enables your fax machine to carry out the following functions: -- Printing on plain paper, transparencies, labels and envelopes -- Scanning documents and converting an image into text with Readiris OCR software -- Scanning from other Microsoft ® Windows ® applications that support TWAIN scanning -- Storing, editing or erasing entries in directories from your PC -- Programming the basic and advanced features from your PC To run Multi-Function Station software, you need the following: -- Compatible OS: Windows 95/98/Me/2000 -- CPU: Windows 95/98: Pentium ® 90 MHz or higher processor Windows Me: Pentium 150 MHz or higher processor Windows 2000: Pentium 166 MHz or higher processor -- Memory minimum: Windows 95/98: 24 MB (32 MB or more is recommended. ) Windows Me: 32 MB (64 MB or more is recommended. ) Windows 2000: 64 MB -- Hard disk: More than 40 MB available space -- Other: Parallel (IEEE1284) port or USB port, and CD-ROM drive When using an IEEE1284 compliant parallel cable: Shielded parallel cable (amphenol 36 pin) must be purchased separately. When using a USB cable (Windows 95 does not offer USB support): Shielded USB cable must be purchased separately. After connecting the USB cable, you must set the cable type to "USB" (feature #15 on page 57). Note: q If you want to replace the parallel cable with a USB cable and vice versa, see page 67. 47 Setup (PC) Installing Multi-Function Station software! 1 Start Windows 95/98/Me/2000 and close all other applications. q The following dialog box will appear. Click [Cancel] to close it. Follow the instructions on the screen until all files have been installed. q Readiris OCR software can also be installed. For details about OCR software, see page 53. q If the fax machine is not connected to your computer, the [Port Selection] dialog box will appear. Select the port number which you want to use. If the fax machine is connected to your computer, the port number will be automatically detected. Note: q 3 There is also a different way to install Multi-Function Station software. See the attached leaflet for PC setup for details. q You must be logged in as an administrator in Windows 2000. To uninstall the software 1. Point to [Settings], then click [Control Panel]. Select [Panasonic Multi-Function Station] from the list. Click [Add/Remove. . . ] (Windows 95/98/Me) / [Change/Remove] (Windows 2000), then follow the instructions on the screen. 2 Insert the included CD-ROM into your CD-ROM drive. The [Choose Setup Language] dialog box will appear. Select the desired language that you want to use with this software from the drop-down list. The installation will automatically start. q If the [Choose Setup Language] dialog box does not appear: The installation will automatically start. q If the installation does not start automatically: Click [Start]. [. . . ] Product that is not returned to Panasonic by 10 business days after shipment of the replacement product will be charged to your credit card account at Panasonic's Suggested Retail Price (see dealer for details). If your original unit is not eligible for warranty service, your card will be charged for the non-warranty repair of the unit at Panasonic's current rate for parts and labor and for any shipping charges associated with this program. If you do not wish to pay out-of-warranty repair costs, you will be responsible for returning the replacement unit to Panasonic and for paying all shipping charges associated with this program including the overnight delivery of the replacement product to you, shipment of the problem unit to Panasonic, shipment of the replacement unit back to Panasonic and the return of your original unit back to you. Credit status will be verified prior to sending the replacement product. [. . . ]