User manual PANASONIC KX-FLB751E

[. . . ] Flat-Bed Multi-Function Laser Fax Operating Instructions Model No. KX-FLB751E Please read these Operating Instructions before using the unit and save for future reference. This model is designed to be used in the United Kingdom and Ireland. Thank you for purchasing a Panasonic facsimile. Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Dealer's name and address Dealer's telephone number Serial number (found on the rear of the unit) Caution: Do not rub or use an eraser on the printed side of recording paper, as the print may smear. q In the event of problems, you should contact your equipment supplier in the first instance. q This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. q Warning: If any other device is connected on the same line, this unit may disturb the network condition of the device. [. . . ] Display: !!!STANDARD STOP RESOLUTION Document cover Using the scanner glass q Confirm that there are no documents in the auto document feeder. Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the " " mark on the unit. q If the original is a thick book, do not close the document cover. necessary, press u repeatedly to select the desired setting (see below). q Make sure the handset is on the cradle. q If Scanner glass STOP RESOLUTION COPY START To select the resolution Select the desired resolution according to the type of document. 2 3 q Do Press d. 100% FINE [01] COPY:PRESS START q If necessary, enter the number of copies (up to 99). ­ FINE: For printed or typewritten originals with small printing. ­ SUPER FINE: For originals with very small printing. ­ PHOTO: For originals containing photographs, shaded drawings, etc. you select "STANDARD", copying will be done using "FINE" mode. q You can also select the resolution after pressing d in step 2. Press u repeatedly to select the desired setting. q If Press d. q The unit will start copying. Note: not open the document cover when making a copy with the auto document feeder. q Any transmittable document can be copied (p. 34) q To make a clear copy from transparencies, be sure to use the scanner glass. Place a blank sheet of paper on the top of the transparency, and leave the document cover open during copying. To stop copying Press {. 46 FA DO CE WN COPY START Using the auto document feeder q Confirm that there are no documents on the scanner glass. Adjust the width of the document guides to the size of the document. Document guides Copying To enlarge a document The unit can enlarge copies to as much as 200% of the original by changing the enlargement rate 5% at a time. After step 2 on page 46, press + repeatedly to select the desired enlargement rate, then press d. using the auto document feeder, the unit will only enlarge the center of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. q When using the scanner glass, the unit will only enlarge the right bottom corner of the document starting from the " " mark on the unit. q When Example: 150% enlarged copy Using the auto document feeder: Original document Enlarged copy AB CD AB CD Using the scanner glass: Original document Enlarged copy AB AB CD CD Scanner glass To reduce a document The unit can reduce copies to as little as 50% of the original by changing the reduction rate 5% at a time. After step 2 on page 46, press - repeatedly to select the desired reduction rate, then press d. Example: 70% reduced copy Original document Reduced copy AB CD AB CD To collate multiple copies The unit can collate multiple copies in the same order as the original document pages. s Example: Making 2 copies of a 4-page original document 4 3 2 1 3 4 3 2 1 Collated pages 1 1 Uncollated pages 2 2 3 4 4 Using the auto document feeder 1. [. . . ] The appliance should be returned together with this guarantee and proof of date of purchase promptly on being found defective at the purchaser's risk and expense to the authorised dealer from whom the appliance was purchased or to the nearest authorised dealer. All enquiries must be through such dealers. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused through installation, adaption, modification or use in an improper manner or inconsistent with the technical and/or safety standards required in the country where this appliance is used, or to damage occurred during transit to or from the purchaser. If at any time during the guarantee period any part or parts of the appliance are replaced with a part or parts not supplied or approved by us or of an objective quality safe and suitable for the appliance, or the appliance has been dismantled or repaired by any person not authorised by us, we shall have the right to terminate this guarantee in whole or in part immediately without further notice. [. . . ]