User manual PANASONIC KX-FLB801E

[. . . ] Operating Instructions Flat-Bed Multi-Function Laser Fax Model No. KX-FLB801E Please read these operating instructions before using the unit and save for future reference. To use this feature, you must subscribe to the appropriate service of your service provider. Be sure to use the telephone line cord included in this unit. This model is designed to be used only in the United Kingdom and Ireland. Location of Controls How to use the operating instructions When following operating instructions, always keep the front cover page (next page) open for easy reference to the buttons. OPEN i Location of controls Please keep this page open when following operating instructions. For a description of each button, see page 13. Buttons (Listed in alphabetical order) BROADCAST B LOWER D CALLER ID K MANUAL BROAD C COLLATE E MENU I CONTRAST F MONITOR U COPY O Navigator key R DIRECTORY E PAUSE S FAX N QUICK SCAN H FAX AUTO ANSWER L RT HELP M REDIAL S RESOLUTION G SCAN Q SET P START V Station keys A STOP J ZOOM H ii Thank you for purchasing a Panasonic fax machine. Attach your sales receipt here. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer's name and address Dealer's telephone number Caution: L Do not rub or use an eraser on the printed side of recording paper, as the print may smear. [. . . ] L To select the resolution, see page 45. If necessary, enter the number of copies (up to 99). After you finish copying, press {STOP} to reset the settings you set in step 3 and 4. 4 5 6 Note: L The effective scanning area changes according to the setting of the paper size (feature #380 on page 59). If you select "LEGAL" for the paper size, the effective scanning area will be maximized (page 30). To stop copying Press {STOP}. 45 5. Copy 5. 3. 2 To reduce a document 5. 3 More copying features L Keep the front cover page open for button locations. L Make sure that the {COPY} light is ON. 1 2 3 4 5 Set the original. Press {V} repeatedly to select from "95%" to "50%" by changing the reduction rate 5% at a time. After you finish copying, press {STOP} to reset this feature. 5. 3. 1 To enlarge a document 1 2 3 4 5 Set the original. Press {^} repeatedly to select from "105%" to "200%" by changing the enlargement rate 5% at a time. After you finish copying, press {STOP} to reset this feature. Example: 70% reduced copy Using the auto document feeder: Original document Reduced copy L When using the auto document feeder, the unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. L When using the scanner glass, the unit will only enlarge the right top corner of the document starting from the l mark on the unit. Example: 150% enlarged copy Using the auto document feeder: Original document Enlarged copy Using the scanner glass (1): Original document Reduced copy 1 5. 3. 3 To collate multiple copies (Auto document feeder only) The unit can collate multiple copies in the same order as the original document pages. Using the scanner glass (1): Original document Enlarged copy 1 1 2 3 4 5 6 Set the original. Press {V} or {^} repeatedly to display "ON". Copy Example: Making 2 copies of a 4-page original document 4 3 2 1 3 4 3 2 1 1 1 2 2 3 4 4 Collated pages Uncollated pages Note: L The unit will store the documents into memory while collating the copies. The maximum number of original document for collating copies depends on the contents of pages, resolution and contrast. Approximately 50 pages of ITU-T No. 1 Test Chart in "TEXT" mode can be stored at a time, if the unit has no documents in memory. See page 88 of the specifications in detail. L If memory becomes full while storing, the unit will only print out the stored pages. L The collating feature is effective only for this time. After copying, this feature will turn OFF automatically. 47 6. [. . . ] This product is designed for use only on the United Kingdom and Ireland's Public Switched Telephone Network and should be used only for normal purposes and in accordance with standard operating instructions. You should complete the registration form overleaf and fax it to us with 7 days of purchase; failure to do so may result in delays in providing warranty service. This warranty covers breakdowns due to design or manufacturing faults; it does not apply to damage, however caused, wear or tear, neglect, incorrect adjustment or repair, or to any items of limited natural life. This warranty does not cover consumables, i. e. [. . . ]