User manual PANASONIC KX-FLB853EX

[. . . ] Flat-Bed Multi-Function Laser Fax with Sorter Operating Instructions Model No. KX-FLB853EX Please read these operating instructions before using the unit and save for future reference. To use this feature, you must subscribe to the appropriate service of your service provider. This model is designed to be used in Czech, Hungary and Slovakia. To use in Hungary and Slovakia, change the location setting (feature #114 on page 64). The language selection is also available (feature #110 on page 64). Location of Controls How to use the operating instructions When following operating instructions, always keep the front cover page (next page) open for easy reference to the buttons. OPEN i Location of controls Please keep this page open when following operating instructions. [. . . ] We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities. You can change the settings on following tabs. 53 7. Multi-Function Station software ­ Labels that are wrinkled, damaged or separated from the backing sheet. ­ Any sheet of labels that has spaces in it where some of the labels have been removed. ­ Labels that do not completely cover the backing sheet as follows. L Printed envelope will be stacked on the upper output tray. Note: L Wrinkles and waving may occur in some cases, even if high quality envelopes are used. High humidity may cause the envelope to curl or seal the envelope. L Store envelopes away from moisture and humidity, where they can lay flat and their edges will not be bent or damaged. 7. 4. 4 Envelopes Use envelopes designed for laser printing. We recommend the following: ­ High quality envelopes of 90 g/m2 paper, ­ Envelopes that have thin, sharply creased leading edges, ­ Envelopes that have diagonal seams, and ­ Envelopes with a moisture content of 4% to 6% by weight. Do not use envelopes with any of the following characteristics (using these may result in paper jams): L Irregularly shaped envelopes L Envelopes with curls, wrinkles, nicks, twists, dog-ears or other damage L Envelopes with side seam construction L Highly textured envelopes, or envelopes with extremely shiny surfaces L Envelopes that seal by removing a peel-off strip L Envelopes with more than one flap to be sealed L Self-adhesive envelopes L Envelopes that are baggy or not sharply creased L Embossed envelopes L Envelopes that have previously been printed on L Envelopes that include cotton and/or fibre material L Use the multi-purpose input tray to print envelopes. L You can load up to 5 envelopes of 90 g/m2 paper at a time for printing, print-side down. Side seam construction Peel-off strip Multiple flaps Twisted Curled Bent-edged Waved Dog-eared Self adhesive 54 7. Multi-Function Station software Scanning Do not attempt to print on any of the following types of envelopes (these may cause damage to the unit): L Envelopes with clasps, snaps or tie strings L Envelopes with transparent windows L Envelopes that use encapsulated types of adhesive that do not require moistening but rely on pressure to seal them 7. 5 Using the unit as a scanner L Keep the front cover page open for button locations. 7. 5. 1 Using Multi-Function Viewer 1 Set the original. Using the auto document feeder Insert the document (up to 50 pages) FACE UP into the feeder until a single beep is heard. L Confirm that there are no documents on the scanner glass. Using the scanner glass Place the document FACE DOWN on the scanner glass, matching the top edge of the document to the l mark on the unit. L Confirm that there are no documents in the auto document feeder. Clasp Transparent window 2 3 4 Start Multi-Function Station. Click the [Scan] icon in the [Multi-Function Viewer] window. L The [Panasonic KX-FLB853EX] (default name) dialogue box will appear. If necessary, change the scanning settings on your computer. L To preview the scanned image, click [Preview]. You can drag the frame to specify the scanned area. If you change the scan mode, brightness, or contrast setting, click [Preview] to refresh the scanned image. [. . . ] Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. [. . . ]