User manual PANASONIC KX-FLM551E

[. . . ] Multi-Function Laser Fax Operating Instructions Model No. KX-FLM551E Please read these Operating Instructions before using the unit and save for future reference. This model is designed to be used in the United Kingdom and Ireland. Thank you for purchasing a Panasonic facsimile. Things you should keep a record of Attach your sales receipt here For your future reference Date of purchase Dealer's name and address Dealer's telephone number Serial number (found on the rear of the unit) Caution: Do not rub or use an eraser on the printed side of recording paper, as the print may smear. In the event of problems, you should contact your equipment supplier in the first instance. q This equipment is designed for use on the UK and Republic of Ireland analogue telephone network. q q Declaration of Conformity: We, Kyushu Matsushita Electric Co. , Ltd. [. . . ] Display: q If Document guides FACE DOW N STANDARD necessary, press u repeatedly to select the desired setting (see below). q Make sure the handset is on the cradle. 3 4 q Press d. 100% FINE q If COPY START STOP [01] COLLATE RESOLUTION / necessary, enter the number of copies (up to 99). Press d. q The unit will start copying. Note: Any transmittable document can be copied (p. 31). To select the resolution Select the desired resolution according to the type of document. -- FINE: For printed or typewritten originals with small printing. Display in step 3: 100% FINE [01] -- SUPER FINE: For originals with very small printing. 100% S-FINE[01] -- PHOTO: For originals containing photographs, shaded drawings, etc. 100% PHOTO [01] q If you select "STANDARD", copying will be done using "FINE" mode. To stop copying Press {. 43 Copying To reduce or enlarge a document To make a reduced copy, press . repeatedly and select the desired reduction rate. The unit can reduce copies to as little as 50% of the original by changing the reduction rate 5% at a time. To make an enlarged copy, press , repeatedly and select the desired enlargement rate. The unit can enlarge copies to as much as 200% of the original by changing the enlargement rate 5% at a time. Example: 70% reduced copy Original document Reduced copy Example: 150% enlarged copy Original document Enlarged copy AB CD AB CD AB CD AB CD Note: q The display will show the rate you selected. Example: 75% FINE [01] Reduction/enlargement rate q For an enlarged copy, the unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, insert it into the unit, and then make a copy. To collate multiple copies The unit can collate multiple copies in the same order as the original document pages. Press c until the following is displayed and start copying. Display: COLLATE=ON Example: Making 2 copies of a 4-page original document 4 3 2 1 3 4 3 2 1 Collated pages 1 Uncollated pages 1 2 2 3 4 4 Note: q If you select collate copies, the display will show the following. Example: 100% FINE [01]C shows collating copy q The unit will store the documents into memory while collating the copies. If memory becomes full while storing, the unit will only print out the stored pages. 44 Setup (PC) Connecting to a computer! Panasonic Multi-Function Station software enables your fax machine to carry out the following functions: -- Printing on plain paper, transparencies, labels and envelopes -- Scanning documents and converting an image into text with Readiris OCR software -- Scanning from other Microsoft ® Windows ® applications that support TWAIN scanning -- Storing, editing or erasing entries in directories from your PC -- Programming the basic and advanced features from your PC To run Multi-Function Station software, you need the following: -- Compatible OS: Windows 95/98/Me/2000 -- CPU: Windows 95/98: Pentium ® 90 MHz or higher processor Windows Me: Pentium 150 MHz or higher processor Windows 2000: Pentium 166 MHz or higher processor -- Memory minimum: Windows 95/98: 24 MB (32 MB or more is recommended. ) Windows Me: 32 MB (64 MB or more is recommended. ) Windows 2000: 64 MB -- Hard disk: More than 40 MB available space -- Other: Parallel (IEEE1284) port or USB port, and CD-ROM drive When using an IEEE1284 compliant parallel cable: Parallel cable (amphenol 36 pin, less than 3 metres long) must be purchased separately. When using a USB cable (Windows 95 does not offer for USB support): USB cable (less than 3 metres long) must be purchased separately. After connecting the USB cable, you must set the cable type to "USB" (feature #15 on page 55). Note: q If you want to replace the parallel cable with a USB cable and vice versa, see page 64. 45 Setup (PC) Installing Multi-Function Station software! 1 Start Windows 95/98/Me/2000 and close all other applications. q The following dialogue box will appear. Click [Cancel] to close it. 3 Follow the instructions on the screen until all files have been installed. [. . . ] The appliance should be returned together with this guarantee and proof of date of purchase promptly on being found defective at the purchaser's risk and expense to the authorised dealer from whom the appliance was purchased or to the nearest authorised dealer. All enquiries must be through such dealers. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse, wear and tear, neglect, incorrect adjustment or repair, to damage caused through installation, adaption, modification or use in an improper manner or inconsistent with the technical and/or safety standards required in the country where this appliance is used, or to damage occurred during transit to or from the purchaser. If at any time during the guarantee period any part or parts of the appliance are replaced with a part or parts not supplied or approved by us or of an objective quality safe and suitable for the appliance, or the appliance has been dismantled or repaired by any person not authorised by us, we shall have the right to terminate this guarantee in whole or in part immediately without further notice. [. . . ]