User manual PANASONIC KX-FLM650

[. . . ] -- 3 pcs. 2 Operating Instructions Trademarks Netscape and Netscape Navigator are either registered trademarks or trademarks of Netscape Communications Corporation in the U. S. Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries. Microsoft, Windows, Windows NT, MS-DOS, Hotmail and ActiveX are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] The window returns to Setup Page without saving the parameters. Restart to make Limit Time of Continuous Motion JPEG settings effective to all Motion JPEG viewers. Instructions for the data fields Language Select the initial language from the list: English (US), English (UK), French, German, Italian, Spanish or Japanese. The selected language is displayed as the initial language on Top Page, Single Camera screen and Multi-Camera screen. All Setup windows are also changed when selecting English (US), English (UK) or Japanese. English (UK) is displayed on Setup windows when selecting French, German, Italian or Spanish. 64 Operating Instructions Instructions for the data fields Top Page Top Page title can be changed. Refer to unavailable character set 1 on page 103 but [space] is available. Refer to displayable character set on page 104. Network Camera picture on Top Page can be changed. Enter the URL (http://) to display the picture on the specified web site. Only [space] and ["] are unavailable in the ASCII character table on page 103. Network Camera picture on Top Page can be set the link to the specified web site. Only [space] and ["] are unavailable in the ASCII character table on page 103. Image Resolution 640 x 480 (cannot set on the Multi-Camera screen. ) 320 x 240 (default) 160 x 120 Favor Clarity: Image is optimized for good clarity. The Alarm mode can send the e-mail without transferring the image. The Alarm mode uses the Network Camera internal clock. Make sure Date and Time has been configured. Refer to page 58 about Date and Time. 1. Click [Alarm] on the Image Transfer window. a. f. 68 Operating Instructions Instructions for the data fields a. External Sensor Input of External I/O activates the alarm trigger. The active trigger time can be set in the primary time and the secondary time. The secondary time is the supplement of the primary time. Always: always activates the alarm trigger. Operational between: Sets the start and stop time of the primary time. The day of the week can be set by checking. Start and stop time is set only in 24 h time mode. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Environment: Do not install Network Camera where the temperature is less than -20 C (-4 F) or greater than 50 C (122 F). [. . . ]