User manual PANASONIC KX-FM205

[. . . ] Read and understand all instructions. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting with Caller ID Services (CWID). Attach your purchase receipt here. Trademarks: openLCR, openLCR. com, and the openLCR logo are the trademarks of openLCR. com, Inc. Accessories (included) For extra orders, call 1-800-332-5368. [. . . ] Line access number [9] (PBX) PauseL KClear [9] N Pause or P N Phone number OR · Pressing Pause or P once creates a 3. 5 second pause. 9P15551234567| 9P15556667777| This prevents misdialing when you dial after confirming d=Next PL Kf the entered number (p. · Pressing Pause or P more than once increases the length of the pause between numbers. Telephone System FLASH Button Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. · Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the mute (p. 48). Selecting the flash time Handset The flash time required depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". · If PBX functions do not work correctly, consult your PBX supplier for the correct settings. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. Initial setting Set tel line KBack dB SelectL 3 Scroll to "Set tel line" by pressing [d] or [B], then press Select. KBack dB SelectL 4 Scroll to "Set flash time" by pressing [d] or [B], then press Select. Set flash time KBack dB SelectL 5 Select the desired time by pressing [d] or [B]. 6 Press Save, then press [OFF]. Set flash time :700ms KBack dB SaveL For assistance, please call: 1-800-211-PANA(7262) 49 Special Features Incoming Call Tone Handset Base Unit During an intercom call (p. 43), you can be informed of incoming calls by two tones. · A maximum of 64 messages (including greeting and memo message) can be recorded. Setting the Unit to Answer Calls Base Unit Press [ANSWER ON] to turn on the Answering System. · The indicator lights and the unit announces "Answer set" and current day and time. Set time" is heard, set the date and time (p. · The unit will announce the remaining recording time if it is less than 3 minutes. · When no recording time is available, you will need to erase any unnecessary messages before new messages can be recorded (p. The unit can indicate that memory is full in the following ways: -- " FULL " will flash on the base unit and the ANSWER ON indicator will flash rapidly until you erase a message. [ANSWER ON] and Indicator -- The unit will announce "Memory full" when you press [ANSWER ON], [GREETING REC], or [MEMO], and after playing back messages or recording a message. · If you do not want the unit to answer calls, press [ANSWER ON] again to turn off the Answering System. The indicator light goes out and "Answer off" is heard. · You can also turn on the Answering System remotely from an outside phone (p. · If you subscribe to Caller ID (p. 30), Caller ID information automatically adjusts the date and time when a call is received, provided you have already set the date and time manually (p. [. . . ] During the "Parts" Limited Warranty period, there will be no charge for parts. You must mail-in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. [. . . ]