User manual PANASONIC KX-FMC230

[. . . ] For assistance, visit our website: http://www. panasonic. com for customers in the U. S. A. or Puerto Rico. Table of Contents Introduction Your phone . 16 Viewing the caller list and calling back . 27 Editing a caller's phone number before calling back . [. . . ] ­ another person answers the call using another phone connected on the same line. For assistance, please call 1-800-211-PANA (7262). 35 Programmable Settings Call options Auto talk When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing {C}. The default setting is OFF. Caller ID edit You can turn the Caller ID number auto edit feature (page 28) on or off. The default setting is ON. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Caller ID edit" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Auto talk" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select "On" or "Off". Press {Save}, then press {OFF}. Note: L If you subscribe to Caller ID service and want to view the caller's information on the handset display after lifting up the handset to answer a call, turn off this feature. Voice enhancer You can turn the voice enhancer feature on or off. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Set tel line" by pressing {V} or {^}, then press {>}. Scroll to "Set flash time" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select the desired setting. Press {Save}, then press {OFF}. 5 Note: L If you select a language you cannot read, press {MENU} {0} {8} {1} {Save} to change the display language to English. For assistance, please call 1-800-211-PANA (7262). 37 Programmable Settings Note: L The setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call. L If the unit is connected via a PBX, certain PBX functions (call transferring, etc. ) may not work correctly. Consult your PBX supplier for the correct setting. Other options Handset key tone You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. The default setting is ON. Line mode The line mode is preset to "B" and generally should not be adjusted. If "Line in use" on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to "A". 1 2 3 4 5 Press {MENU}. [. . . ] You must mail-in your product during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. [. . . ]