User manual PANASONIC KX-FP143UA

[. . . ] The language selection is also available (feature #110 on page 62). Location of Controls How to use the operating instructions When following operating instructions, always keep the front cover page (next page) open for easy reference to the buttons. OPEN i Location of controls Please keep this page open when following operating instructions. For a description of each button, see page 11. Buttons (Listed in alphabetical order) BROADCAST B HELP N CALLER ID L LOWER D COLLATE E MANUAL BROAD C CONTRAST F MENU I COPY P MONITOR V DIRECTORY E Navigator key S FAX O PAUSE T FAX AUTO ANSWER M QUICK SCAN H FLASH U REDIAL T RESOLUTION G SCAN R SET Q START W Station keys A STOP K TONE J ZOOM H ii Thank you for purchasing a Panasonic fax machine. This model is designed to be used in Czech, Hungary and Slovakia according to the location setting feature. To use in Hungary and Slovakia, change the setting (feature #114 on page 62). You can select Czech, Hungarian, Slovak or English for the language. [. . . ] After you finish copying, press {STOP} to reset the settings you set in step 3 and 4. 4 5 6 Note: L The effective scanning area changes according to the setting of the paper size (feature #380 on page 63). If you select "LEGAL" for the paper size, the effective scanning area will be maximised (page 34). To stop copying Press {STOP}. 48 6. Copy 6. 3. 2 To reduce a document 6. 3 More copying features L Keep the front cover page open for button locations. L Make sure that the {COPY} light is ON. 1 2 3 4 5 Set the original. Press {V} repeatedly to select from "95%" to "50%" by changing the reduction rate 5% at a time. After you finish copying, press {STOP} to reset this feature. 6. 3. 1 To enlarge a document 1 2 3 4 5 Set the original. Press {^} repeatedly to select from "105%" to "200%" by changing the enlargement rate 5% at a time. After you finish copying, press {STOP} to reset this feature. Example: 70% reduced copy Using the auto document feeder: Original document Reduced copy L When using the auto document feeder, the unit will only enlarge the centre of the upper part of the document. To make an enlarged copy of the bottom of the document, turn the document around, and then make a copy. L When using the scanner glass, the unit will only enlarge the right top corner of the document starting from the l mark on the unit. Example: 150% enlarged copy Using the auto document feeder: Original document Enlarged copy Using the scanner glass (1): Original document Reduced copy 1 6. 3. 3 To collate multiple copies (Auto document feeder only) The unit can collate multiple copies in the same order as the original document pages. L For Windows XP and Windows 2000 users, you must be logged in as an administrator in order to install MultiFunction Station. L Install Multi-Function Station before connecting the unit to a computer. If the unit is connected to a computer before installing Multi-Function Station, the [Found New Hardware Wizard] dialogue box will appear. Insert the included CD-ROM into your CDROM drive. L The [Choose Setup Language] dialogue box will appear. Select the desired language that you want to use with this software from the drop-down list. The installation will automatically start. L If the [Choose Setup Language] dialogue box does not appear: The installation will automatically start. L If the installation does not start automatically: Click [Start]. Type "D:\setup" (where "D:" is the drive letter of your CD-ROM drive). (If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive. ) 6 7 2 Important notice for Windows XP users L If you use Windows XP, the following message may appear after step 6: "The software you are installing for this hardware has not passed Windows Logo testing to verify its compatibility with Windows XP" This is normal and the software will not cause any difficulties with your operating system. [. . . ] L The pictures and illustrations in these instructions may vary slightly from the actual product. 93 10. General Information Recording paper specifications Recording paper / Transparency / Label size: A4: 210 mm × 297 mm Letter: 216 mm × 279 mm Legal: 216 mm × 356 mm Envelope size: #10: 105 mm × 241 mm DL: 110 mm × 220 mm Recording paper weight: 60 g/m2 to 90 g/m2 Note for recording paper: L We recommend that you test paper (especially special sizes and types of paper) on the unit before purchasing large quantities. L Do not use the following types of paper: ­ Paper with a cotton and/or fibre content that is over 20 %, such as letterhead paper or paper used for resumes ­ Extremely smooth or shiny paper, or paper that is highly textured ­ Coated, damaged or wrinkled paper ­ Paper with foreign objects attached, such as tabs or staples ­ Paper which has dust, lint or oil stains ­ Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 °C, such as vellum paper. These materials may transfer onto the fusing roller and cause damage. [. . . ]