User manual PANASONIC KX-FP145

[. . . ] Compact Fax and Digital Answering System Operating Instructions Model No. KX-FP145 FOR FAX ADVANTAGE ASSISTANCE: -- PHONE CALL 1-800-HELP-FAX (1-800-435-7329) -- E-MAIL TO consumer_fax@panasonic. com for customers in the U. S. A. or Puerto Rico -- REFER TO www. panasonic. com for customers in the U. S. A. or Puerto Rico Please read these Operating Instructions before using the unit and save for future reference. This model is designed to be used only in the U. S. A. Location of Controls How to use the operating instructions When following operating instructions, always keep the front cover page (next page) open so that you will find easy reference to the buttons. OPEN i Location of Controls Please keep this page open when following operating instructions. [. . . ] The unit will then play back the next message. Erasing all the messages Press {*}{5} to erase all the messages. Voice guide: "All messages have been erased. " L A long beep will sound. Monitoring the room Press {6} to monitor the sound for about 30 seconds in the room where the unit is installed. To continue monitoring, press {6} again within 10 seconds. Recording a marker message After playing back the messages, you can leave an additional message. Voice guide: "All messages have been played. " 2. Voice guide: "Please leave your name and message after the beep. " 3. Re-recording your greeting message You can change the TAM/FAX greeting message. L If you pause for over 2 seconds, 6 beeps will sound and the recording will stop. L The new greeting message will be played. Skipping the greeting message Press {0} during the greeting message playback. L The unit will skip the rest of the greeting message. Turning message transfer ON or OFF You must program a transfer telephone number beforehand (feature #60, page 54). Press {8}{1} to turn ON the message transfer. Voice guide example: "Message transfer is set. Transfer phone number is 123. . . " Press {8}{2} to turn OFF the message transfer. Voice guide: "Message transfer is off. " Turning pager call ON or OFF You must program a pager number beforehand (feature #70, page 54). Voice guide example: "Pager call is set. Pager number is 098765432. " Press {8}{4} to turn OFF the pager call. Voice guide: "Pager call is off. " Changing the receive mode Press {8}{0} to change the receive mode from TAM/FAX to TEL. L You cannot return to TAM/FAX mode in the same call. To return to TAM/FAX mode, see the following. [. . . ] If your original unit is not eligible for warranty service, your card will be charged for the non-warranty repair of the unit at Panasonic's current rate for parts and labor and for any shipping charges associated with this program. If you do not wish to pay out-of-warranty repair costs, you will be responsible for returning the replacement unit to Panasonic and for paying all shipping charges associated with this program including the UPS delivery of the replacement product to you, shipment of the problem unit to Panasonic, shipment of the replacement unit back to Panasonic and the return of your original unit back to you. Credit status will be verified prior to sending the replacement product. See dealer for limited warranty details. [. . . ]